[SEL] Wico "F"

[Dave Ernst]

Are you sure it is an "F"? All my books show is a "FW" which fits inside the 
flywheel of engines, but don't show a Witte application.


----- Original Message ----- 
From: "Steve Gray" <segray at mlode.com>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Wednesday, May 17, 2006 11:36 PM
Subject: [SEL] Wico "F"


> Hi All -
>
>  Anybody out there in iron land ever see literature available for a Wico 
> "F" mag? This little Witte "U" that I recently picked up in a group of 
> engines I acquired, uses the Wico. The mag is located in the hub of the 
> off side flywheel. The engine itself is a runner, just needing the normal 
> slack taken out of all the bearings. Thanks in advance!
>
> - Steve
>
> -- 
> Steve Gray
> Member EDGE & TA, Br. 13 & 27
> Sonora, California USA
> e-mail:   segray at mlode.com
> Home page:   http://www.oldengineshed.com
>
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>
>