[SEL] Re: Clutch Pulley

[Andy Glines]

Thanks for the pics Duncan.  Those clutches look a lot like mine.  I'll 
print a couple and compare to my clutch when I get home.
Keith, I do not have pics yet.  If I don't figure it out soon I'll bring it 
to SIAM Classic Iron show for identification.

>    1. Re: Clutch Pulley (Duncan Denman)
>Message: 1
>Date: Wed, 10 May 2006 21:34:02 -0500
>From: Duncan Denman <canuckiron at wightman.ca>
>Subject: Re: [SEL] Clutch Pulley
>To: The SEL email discussion list <sel at lists.stationary-engine.com>
>Message-ID: <4462A29A.8000303 at wightman.ca>
>Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
>Hi Andy,
>
>Probably off a Massey Harris engine. And it would have been a big one
>like this.
>http://buzzcoil.brinkster.net/massey-harris/page506.html
>
>Duncan
>
>
>Andy Glines wrote:
>
> > I was at an auction about a month ago and bought 3 clutch pulleys.  I
> > need some help identifying one of them.  The pulley is 16" diameter
> > and about 8" wide.  It attaches to the flywheel with 3 bolts.  The
> > only marking I have found is on one of the spokes.  The marking looks
> > like this    <M-H>  Does anyone know who made this clutch?  What does
> > it fit?