[SEL] Babbitt bearings poured on the Alamo.

Luke Tonneberger flywheelin at hotmail.com
Mon May 1 10:39:40 PDT 2006


What a great documentary!! Thank you both for taking the time to photograph 
and share this. Obviously alot of thought went into the setup. Looks like 
the bearings came out perfect.

Luke Tonneberger
Rockford, Michigan
USA

======================

>From: Curt <curt at imc-group.com>
>
>Folks this was a banner weekend! Accomplished a significant milestone in 
>the restoration of the Alamo engine by successfully pouring both the lower 
>and upper mains on this engine. I had done lowers before, but was 
>apprehensive about the uppers. As it turned out they were easier than the 
>lowers. Missy and I picture documented this as best we could and I've put 
>it on the website. Maybe it will be useful to someone when pouring theirs.
>Here is the link:
>http://www.oldengine.org/members/holland/images/AlamoBabbittPouring/Thumbnails.html
>
>Hope you enjoy.
>Curt Holland
>Gastonia, NC





More information about the sel mailing list