[SEL] Stover

Richard Fink Sr nancydick at pennswoods.net
Sat Jun 10 21:24:28 PDT 2006


Hi Joe Lee peterson is always set up at coolsprings isn't he.
Thanks
R Fink




At 10:31 AM 6/8/2006 -0400, you wrote:
>Hi Rich,
>
>You sure seem to have more than enough trouble with mags.
>
>I've never putzed with the mags on my engines - but -
>just for fun, I went out to see what mine were set at.
>
>When open the points are about 1/8th inch.
>
>The Wico Manual doesn't give a specific gap - However - It tells it like
>this:
>
>On engines using the type No.2 drive (such as Stover CT-1)
>the breaker point contacts should just open when the armature
>is 3/32" away from the cores.
>
>Hope this helps.
>
>  Joe "Pip" Betz said that.
>  jlb94 at juno.com - - - www.oldengine.org/members/betz
>   ,-._,-.      http://community.webshots.com/user/pipbetz
>   \/)"(\/         "The big fish always get away -
>   (_o_)                    that's why they're big."
>
>_______________________________________________
>SEL mailing list
>SEL at lists.stationary-engine.com
>http://www.stationary-engine.com/mailman/listinfo/sel







More information about the sel mailing list