[SEL] Battery's

[Nick Holden]

 Hi
 thanks to all who gave advice
Just put a 12 volt on and it started straight away
 
 
 
Nick
Banbury (UK)
http://community.webshots.com/user/nickholden
 
-------Original Message-------
 
From: Patrick M Livingstone
Date: 05/30/06 12:15:03
To: 'The SEL email discussion list'
Subject: RE: [SEL] Battery's
 
Hi Nick,
  I use a 12v gel-cell and the low-tension side of an automotive coil
on my 1hp R&V and on the 12hp as well. Both run fine but I get much better
battery life on the 12hp, probably because it fires a lot less than the
little one :)
Patrick
 
Patrick M Livingstone
Leichhardt NSW
http://www.oldengine.org/members/pml/Index.html
http://www.users.bigpond.com/pml/
-----Original Message-----
 
 
Hi
 
Can any one tell me the best size battery  AH etc
 
To run my R&V engine on I have just had a new
 
6 volt on but the spark out of the coil was not very good
 
Have now got the battery on charge to try again
 
I am trying a 6 volt 10 AH is this going to be able to run
 
All weekend on
 
 
 
Regards  Nick
 
 
 
 
_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel