[SEL] Economy runs

[Ron D Haskell]

Hi Rob.
So far I set it on the generic opening, starts to open 35-45degrees
before BDC and closes 5 degrees after ODC.  This is from memory, so I may
be off a  little.  It had no trouble running at 160 rpms on the coil and
plug.
I was looking on the WAPA web site for a picture to send to Rick S. but
can't find it.  What happened to all the old show pictures?

Ron Haskell
rdhaskell at juno.com
Riverside California USA
http://www.oldengine.org/members/haskell/

On Wed, 18 Jan 2006 09:45:17 -0800 "Rob Skinner" <rskinner at rustyiron.com>
writes:
> 
> > Does yours have a pretty good bark?  Can't seem to quiet 
> > mine down much. 
> > Possibly if you get a round tuit, you could snap a photo 
> > regarding exhaust valve opening.
> 
> Hi Rick,
> Have you tried retarding the opening of her exhaust valve?
> On an engine that just loafs along at slow speed, the valve
> can open really close to bottom dead center with no ill
> effects.  
> 
> Rob