[SEL] Alamo piston pattern update

[Dave Otto]

Hi Curt

Your pattern work is looking great, and as usual I have a question or two.
Do I need to construct the gate and riser parts on my pattern? Or is this
something that Rick will do? Were you able to get the proper board size or
did you just wing it.

I have been getting a little work done on Falk pattern and core box, I'm not
nearly as quick as you but I will get there eventually.

Pictures at:
http://community.webshots.com/album/547573772SETaSd


Dave

P.S. Still need to see some pics. of the Alamo engine

Dave Otto
Boise, Id
USA
Dotto at velocitus.net
http://community.webshots.com/user/otto1960




> -----Original Message-----
> From: sel-bounces at lists.stationary-engine.com [mailto:sel-
> bounces at lists.stationary-engine.com] On Behalf Of Curt
> Sent: Monday, February 13, 2006 11:22 AM
> To: SEL; SEL (Oldengine.org)
> Subject: [SEL] Alamo piston pattern update
> 
> Guys,
> Over the weekend I wrapped up the pattern portion of the Alamo piston
> project. About a week ago I posted pictures of the corebox part of the
> project and this post covers the pattern portion. About half way down is
> an update marked 2/13/06. Hope you enjoyed these.
> Curt Holland
> Gastonia, NC
> P.S. Now if Rick can just get the Tod Works Foundry up and going..... :-)
> 
> http://www.oldengine.org/members/holland/images/AlamoPistonPattern/Thumbna
> ils.html
> 
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel