[SEL] 2 Hp "ENGINE" question

[Edd Payne]

Hay Mate you sent a reply the same time as me.There was no response when I 
looked.
EDD PAYNE
PO Box 364 Gulgong N.S.W
Australia
2852
Phone:0263742387
edsengns at optusnet.com.au
edsengns
----- Original Message ----- 
From: "Patrick M Livingstone" <pml1 at bigpond.net.au>
To: "'The SEL email discussion list'" <sel at lists.stationary-engine.com>
Sent: Tuesday, December 05, 2006 10:24 AM
Subject: RE: [SEL] 2 Hp "ENGINE" question


> Hi Barry,
> Sounds like you have a Buzacott/Rosebery 2A. The early ones were
> badged as 'The Engine'. Manuals are readily available from Rustic Spares 
> and
> Rallybadges.
> BTW I would recommend not trying to take the flywheels off the crank 
> unless
> it is absolutely necessary, you are asking for a whole world of pain. They
> are very light castings and break very easily when you try to remove them. 
> I
> know that one from experience.
>
> Patrick M Livingstone
> Leichhardt NSW
> http://www.oldengine.org/members/pml/Index.html
> http://www.users.bigpond.com/pml/
> -----Original Message-----
>
>
> wanted please ANY info on an open crank "ENGINE"
> 2 Hp .magy type,removal of flywheels, timing , govenor
> etc.
> thanks
>            Barry Gorman
>    Hunter Valley NSW  AUSTRALIA
>  BarryandPamGorman at bigpond.com
>
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel