[SEL] More help needed

[Nick Holden]

 Hi Steve
Look on my webshots I just took some photos if you 
Want any more info just ask
 
Nick
 
Nick
Banbury (UK)
http://community.webshots.com/user/nickholden
 
-------Original Message-------
 
From: Steve Gray
Date: 11/08/2006 17:45:28
To: The SEL email discussion list
Subject: [SEL] More help needed
 
Hi All -
 
   I've gotten involved with the possible repairs of a common John Deere
1.5 HP E and wonder if anyone of the list has a Deere mag currently
pulled apart? I need the orientation of the woodruff key in the armature
shaft to the countersunk screw holes in the pot metal end plate of the
armature. This one's been in trouble and spun the shaft in the pot metal
casting losing both the mechanical attachment and the timing position.
The fix is fairly simple, but I need the key position right for the mag
timing. Any help is greatly appreciated. Picture at
http://www.oldengineshed.com/snapshots/deere1.jpg. Many thanks in advance!
 
- Steve
 
--
Steve Gray
Member EDGE & TA, Br. 13 & 27
Sonora, California USA
e-mail:   segray at mlode.com
Home page:   http://www.oldengineshed.com
 
 
_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel