[SEL] Tools

[Ron Page]

Thanks Patrick

I will have to note that name down and keep my eye open for one.

Ron
Canberra

----- Original Message -----
From: "Patrick M Livingstone" <pml1 at bigpond.net.au>
To: "'The SEL email discussion list'" <sel at lists.stationary-engine.com>
Sent: Wednesday, April 26, 2006 1:56 PM
Subject: RE: [SEL] Tools


> Hi Ron,
> I have seen many, many different brands on the screwdrivers. I have
> a two blade one which has G. Munro on it but it is staying with my G.
Munro
> shearing plant.
> There is a guy I have seen displaying at a few rallies who specializes in
> shearing gear. He has an impressive collection.
>
> Patrick M Livingstone
> Leichhardt NSW
> http://www.oldengine.org/members/pml/Index.html
> http://www.users.bigpond.com/pml/
> -----Original Message-----
>
> Recently I went to a rally in Wagga Wagga and took along my Lister A.
With
> this I decided to show all my Lister tools and the like.  It is at
>
> http://community.webshots.com/photo/120449196/2193472100053851130AIHowM
>
> However, I have an ulterior motive.  You will note there a five shearers
> screwdrivers in the photo - all different.  For those on the other side of
> the ponds, do you have anything like these that could be obtained for me,
> particularly with brand names.  If so please let me know off list.  And
for
> the Oz members I am particularly after a black handled Lister, a Cooper
and
> a Buzacott or anything else that may be around.  All those that I have
have
> two blades but I do know of one that was produced with three blades.  Once
> again I can be contacted off list.
>
> Any assistance would be appreciated.  Thanks in advance
>
> Ron
> Canberra.
> _______________________________________________
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel