[SEL] air blow off nozzle fix

[Paul Maples]

Thanks Richard for the information, it is greatly appreciated.

Paul

----- Original Message ----- 
From: "Richard Allen" <linstrum55 at yahoo.com>
To: <sel at lists.stationary-engine.com>
Sent: Tuesday, September 20, 2005 12:28 AM
Subject: [SEL] air blow off nozzle fix


> Hi, Paul,
> 
> If your air snozz does not have an internal spring-loaded pressure
> reducer, take your nozzle apart and drill out the pin hole that
> restricts the air. If it has a spring loaded pressure reducer, take the
> guts out of it. Either that or make your own out of a male air chuck
> quick disconnect tip screwed into a 3/8-inch brass ball valve with a
> 3/8-inch pipe plug screwed in the other side, drilled with your choice
> of hole size through it for the air emitter tip. It won't be a spring
> loaded push button job, but it won't emit just an anemic butterfly
> fart, either. I have an old original WW2 era Chicago Pneumatic air
>