[SEL] LeRoi Update

[Richard Strobel]

Very nice iron and pictures, Larry

Thanks much
RickinMt.


----- Original Message ----- 
From: "Larry Evans" <lfevans at pacbell.net>
To: <sel at lists.stationary-engine.com>
Sent: Monday, September 05, 2005 8:13 PM
Subject: [SEL] LeRoi Update


> Hi......
>
> You might recall that a few weeks ago I asked about gluing vee belts into
> the grooves of a pulley to make it usable as a flat belt pulley.  I 
> finally
> tried it using Weldwood Contact Cement.  So far, it seems to be working
> just fine.  I have put some additional pictures up on the web page and 
> have
> also written up a short history of the unit.  It is a 2 cylinder LeRoi
> mounted on a fairly large cart with an air compressor.
>
> If interested take a look at:
> http://www.oldengine.org/members/levans/leroi/
>
> It's going to be shown at our club display at the Los Angeles County Fair
> for the next three weeks so I should find out if it really is a good fix.
>
> Regards,
>
> Larry Evans
> Arcadia, Southern California, USA
> MailTo:LFEVANS at pacbell.net
> http://www.oldengine.org/members/levans/
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>