[SEL] Fairbanks Morse ZD Cracked Block - Best Way to Repair

[Germoamer at aol.com]

In a message dated 9/4/2005 4:22:46 AM Eastern Daylight Time, FRM8198 at aol.com 
writes:

<<  and sealing it with JB Weld.  >>


Francis,

I have had much success with sealing cracks of this nature in both blocks and 
heads with nothing but JB Weld. Took a die grinder and cleaned out the crack 
and applied it, then sanded down smooth. If that does not work, you can always 
clean it out later and go down the welding path!

Tom Schmutz
Concord, Va. USA
Germoamer at aol.com