[SEL] New Way Vertical 4 1/2 hp Model E, Type C

[Richard Strobel]

Tim, could I get a picture of the ignition system for the 4 and a 
half...preciate it.  and I'm cc'ing ya as I think the sel server is down.


----- Original Message ----- 
From: "Tim Christoff" <tchristoff at earthlink.net>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Tuesday, October 11, 2005 6:21 PM
Subject: RE: [SEL] New Way Vertical 4 1/2 hp Model E, Type C


> Rick
>
> I do have a 4  1/2 upright in my stable of New Way's so I can get you any
> pic you would need.  BTW, New Way's did not use a spark saver, do NOT pick
> it up by the spark plug hole, DON'T under any circumstances try and push
> the piston futher down the cylinder to unstick it.  If the piston is ever
> to end up at the top of the cylinder and the top ring is not stuck, it 
> will
> spread out in a hollow spot in the casting and you will have one very big
> paper weight.
>
> Tim Christoff.
>
>
> > [Original Message]
> > From: Richard Strobel <Richard_Strobel7 at msn.com>
> > To: The SEL email discussion list <sel at lists.stationary-engine.com>
> > Date: 10/11/2005 7:52:39 AM
> > Subject: [SEL] New Way Vertical 4 1/2 hp  Model E, Type C
> >
> > Thanks for the reply Tim.  I have a fairly good idea now on where the
> carb
> > is located and was very surprised to see it way down next to the base.
> > Makes sense tho seeings as how there's no fuel pump.  I've got a classic
> > Zenith which I'll use until the right one shows up.  I've contacted all
> the
> > vendor's ..to no avail.  50 rocket finder fee to anyone who can find me
> > one!! for a decent price.
> >
> >   Is there anyone on the list that has a New Way and can snap a few
> > pix's?..you'd be my friend forever..this is a very kewl engine!!!
> >
> >   Seeings as how this is spark plug fired, do I need a Buzz box, i.e.
> Ford
> > coil or equivalent?  I see what appears to be a spark saver.  Wouldn't 
> > it
> be
> > kewl also to find a New Way Spark Plug?  guess they imported the
> porcelain.
> >
> >   And on another final note (and the crowd goes wild), whatcha all think
> > about lifting a engine using the spark plug hole?  I personally don't
> like
> > it.
> >
> > Ya'll have a nice day
> > RickinMt.
> >
> >
> > ----- Original Message ----- 
> > From: "Tim Christoff" <tchristoff at earthlink.net>
> > To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
> > Sent: Monday, October 10, 2005 9:04 PM
> > Subject: RE: [SEL] In need of a BIGGER doghouse:-)
> >
> >
> > >
> > >
> > > >   It's a 4 1/2 hp, stuck, and need a carby bad for it.
> > >
> > > > and a close up of the fan.  Is that an oil line and does this baby
> have
> > > an
> > > > oil pump?
> > >
> > >
> > > It is an oil line but it does not have an oil pump and those lines
> don't
> > > do
> > > much good, you usually need to oil the fan manually from time to time.
> > > The
> > > mixer will set you back around $125-$150 if you can find one.  My 
> > > guess
> is
> > > you will have better luck getting someone to cast one for you.
> > >
> > > Tim Christoff
> > >
> > >
> > >
> > > _______________________________________________
> > > SEL mailing list
> > > SEL at lists.stationary-engine.com
> > > http://www.stationary-engine.com/mailman/listinfo/sel
> > >
> > _______________________________________________
> > SEL mailing list
> > SEL at lists.stationary-engine.com
> > http://www.stationary-engine.com/mailman/listinfo/sel
> >
> >
> > -- 
> > No virus found in this incoming message.
> > Checked by AVG Anti-Virus.
> > Version: 7.0.344 / Virus Database: 267.11.14/129 - Release Date:
> 10/11/2005
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>