[SEL] All comes together at once :-)

[Richard Strobel]

Thanks Tom...sounds like a plan

Rick


----- Original Message ----- 
From: <Germoamer at aol.com>
To: <sel at lists.stationary-engine.com>
Sent: Sunday, October 02, 2005 7:57 AM
Subject: Re: [SEL] All comes together at once :-)


> In a message dated 10/1/2005 10:48:57 PM Eastern Daylight Time,
> Richard_Strobel7 at msn.com writes:
>
> << Some time ago we talked about
>  replacing the contacts, but don't remember what would be the best.  I'm
>  thinkin' now a stainless steel rivet.   whatcha all think? >>
>
> Rick,
>
> Two simple items usually around the shop can be used and last a long time 
> for
> us occasional runners.  Mild steel rivets like those used on hay mower
> sections, and finish nails have great heads on them too.  Come in all 
> different
> sizes and usually will fit what you are fixing.  The mild steel makes for 
> easy
> peening to the arms.  Drill the old ones out and install the new ones in a 
> few
> minutes.  Works for me!
>
> Tom Schmutz
> Concord, Va. USA
> Germoamer at aol.com
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>