[SEL] Salesman Sample was Re: transport

[Steve Barr]

Curt

There was a Callahan Sample at Rollag this year... At least that is what
Kenny Wolf called it as it was his.  It was very cool...even the chain
drive mag worked.

4 Pics on my Rollag Gas Engine Page ~80% Down
http://www.oldengine.org/members/sbarr/ShowReports/2005Rollag1.htm

http://www.oldengine.org/members/sbarr/images/Shows/2005Rollag/engine/86.jpg

Steve

--- Curt <curt at imc-group.com> wrote:

> Hey Steve, that is NEAT! I can picture you lusting over this. For size 
> reference, do you know the size oiler this is?
> 
> I've heard of salesmen samples for other products but never for engines.
> Does anyone know of other brands of salesmen sample gas engines that 
> were made?
> 
> Curt Holland
> Gastonia, NC
> 
> Steve Barr wrote:
> 
> >Curt
> >
> >I have known of Reg's engine for a few years now....but don't have it
> on
> >the photo list page.
> >
> >Did you see this little salesman's sample Challenge????
> >
>
>http://www.oldengine.org/members/sbarr/images/Shows/2003Sandwich/part2/86.jpg
> >
>
>http://www.oldengine.org/members/sbarr/images/Shows/2003Sandwich/part2/87.jpg
> >
>
>http://www.oldengine.org/members/sbarr/images/Shows/2003Sandwich/part2/88.jpg
> >
>
>http://www.oldengine.org/members/sbarr/images/Shows/2003Sandwich/part2/89.jpg
> >
>
>http://www.oldengine.org/members/sbarr/images/Shows/2003Sandwich/part2/90.jpg
> >
>
>http://www.oldengine.org/members/sbarr/images/Shows/2003Sandwich/part2/91.jpg
> >
> >The family that has it will not sell it :(  and they have had it for
> many
> >years.  Made all from castings.  I don't know of any others...I tried
> >talking Reg into making one for me, but it hasn't happened yet...I need
> to
> >keep on him...  
> >
> >I think that I will put pics of the sample on the Challenge page (just
> >updated yesterday).
> >
> >http://www.oldengine.org/members/sbarr/Challenge/Challenge.htm
> >
> >It is about time to break the photo page apart due to the size of it
> for
> >those on dialup.  62 engines + a few more that I am waiting for
> pictures
> >of.
> >
> >Steve
> >
> >--- Curt <curt at imc-group.com> wrote:
> >
> >  
> >
> >>Thanks Luke. You're even faster than Steve Barr at finding Challenge 
> >>engines! :-)
> >>Curt
> >>
> >>Luke Tonneberger wrote:
> >>
> >>    
> >>
> >>>Hi Curt,
> >>>
> >>>There are pictures of them on his web page. Here they are:
> >>>
> >>>http://www.oldengine.org/members/randmingold/challenge.htm
> >>>
> >>>http://www.oldengine.org/members/randmingold/challengem.htm
> >>>
> >>>      
> >>>
> >>    
> >>
> 
> 
> To UN-subscribe, send a message to:
> 
> stationary-engine-request at oldengine.org
> with:
> unsubscribe
> in the subject of the message. Nothing else, no SIGs, etc.
>