[SEL] ZD bearings

[Richard Strobel]

Although I've never had one apart, wouldn't the shims keep them from 
turning?

RickinMt.


----- Original Message ----- 
From: "Bill Boyce" <bboyce at swat.coop>
To: "stationary engine list" <sel at lists.stationary-engine.com>
Sent: Saturday, March 05, 2005 7:49 PM
Subject: [SEL] ZD bearings


hello all,, my son is rebuilding a ZD for a neighbor and has run into a 
problem,,, new crank bearings were ordered from hit and miss, but there is 
no way to prevent them from turning in the bores,,,,, it looks like the 
original bearings had a tab on the inside lip that meshed with a notch in 
the brearing cap to prevent them from spinning,,,,,has anyone run into this 
problem? and what was done to correct it ? i;m going to call Ed monday, but 
thought i mite get some ideas here too,,,, thanks in advance for any help.
bill boyce
lost prairie, arkansas
_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel