[SEL] Belting question?

[Jim O'Hagan]

Mike ,Adding the sum of the Dia's and multiplying the total by 3.14 also
works. Jimmy O'

Jim O'Hagan

-----Original Message-----
From: sel-bounces at lists.stationary-engine.com
[mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of Jim O'Hagan
Sent: Wednesday, June 01, 2005 3:34 PM
To: 'The SEL email discussion list'
Subject: RE: [SEL] Belting question?

Mike ,Try 3.14x dia. of each coil. Add up the sum of each calculation. You
should come pretty close. Cya, Jimmy O'Hagan

Jim O'Hagan
-----Original Message-----
From: sel-bounces at lists.stationary-engine.com
[mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of Mike Rohrer
Sent: Wednesday, June 01, 2005 12:35 PM
To: 'The SEL email discussion list'; 'Steam-engine mailing list'
Subject: [SEL] Belting question?

What is the calculation to figure the length of flat belting rolled up?  

Thanks

Mike

Mike Rohrer

Smithsburg, Maryland USA

Collector of Antique Farm Literature

Homepage - http://members.myactv.net/~wmrohrer/

----------------------------------------------------------------------------
------------------------------

If "ifs" and "buts" were candy and nuts oh what a Christmas we'd have!

Willie Rohrer 1917-2000

____________________________________________________________________________
____

 

_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel


_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel