[SEL] Titan chainsaw

Richard Strobel Richard_Strobel7 at msn.com
Sat Jul 23 09:26:56 PDT 2005


Couple days ago, I poured some lacquer thinner in the gas tank and drained 
it out yesterday. Using the carb drain, everything looked pretty clean so I 
pulled the plug and put some 2-cycle oil in the hole and pulled it thru a 
couple times.  The plug had excellent spark also.  Put everything back 
together and gave her a pull and she ran for about 3 seconds on the fumes. 
Will have to pull the carb and see why the float is stuck or whatever.

Thanks for the replies guys!!
RickinMt.


----- Original Message ----- 
From: "John Hall" <jthall at worldnet.att.net>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Saturday, July 23, 2005 4:50 AM
Subject: Re: [SEL] Titan chainsaw


> I've got a small Titan like yours but haven't got it running yet. Our big
> one uses a mix of 1pt of 50wt oil to the gallon, smokes heavy until it 
> gets
> warmed up. I personallly don't use oil mix diffrent from what the
> manufacturer says in any of our old saws. Most of the old saws ran a 1/2 
> pt
> of 30wt to the gallon. Mall's used 3//4 a pt I believe. Most of the time
> there is a tag somewhere on the saw that gives the oil/gas mix.
>
> Titans were made in Washington state. The story related to me by someone
> from the west coast was that the factory went out of business many years 
> ago
> and saw production/support was not sold off. Don't know how accurate the
> account is but the fellow knew more about the saws than anyone in my neck 
> of
> the woods.
>
> John Hall
>
> ----- Original Message ----- 
> From: "Richard Strobel" <Richard_Strobel7 at msn.com>
> To: "sel" <sel at lists.stationary-engine.com>
> Sent: Friday, July 22, 2005 8:34 AM
> Subject: [SEL] Titan chainsaw
>
>
> >  Howdy all again;
> >
> >  Along with the rail bending tool, we picked up this pretty neat 
> > chainsaw.
> > The chainbar rotates leaving the engine upright.  All we can find is a
> > casting mark "Titan."
> >
> >  Any info available on these man killers:-)) whew!!
> >
> > http://community.webshots.com/photo/60686285/399556295pxakmC
> >
> > RickinMt.
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
> 



More information about the sel mailing list