[SEL] New Wheels

[Luke Tonneberger]

Ron,

Did you radius the ends of the 1/2" pipe that you used for the spokes to 
match the hub and wheel radius? Or were the ends of the spokes just cut 
square and the gap filled with weld?

Luke Tonneberger
Rockford, Michigan
USA
===============

>From: rdhaskell at juno.com
>Reply-To: The SEL email discussion list <sel at lists.stationary-engine.com>
>To: sel at lists.stationary-engine.com
>Subject: [SEL] New Wheels
>Date: Tue, 12 Jul 2005 17:09:47 -0700
>
>Hi all.  Thought some of you might like to see a new set of wheels I am
>making for my 6hp Witte Dieselectric engine.  The bands are 3/16x3, hubs
>3x4 with 2" holes for loose roller bearings made out of 3/8 cold rolled,
>and spokes made of 1/2" black pipe.  Less than $40 in materials so far
>not counting bearing material,  and a few hours time.
>
>http://albums.photo.epson.com/j/View?u=3009370&a=30768854&p=72252347&Sequ
>ence=0&res=high
>
>Ron Haskell
>rdhaskell at juno.com
>Riverside, California
>USA
>http://albums.photo.epson.com/j/AlbumList?u=3009370&f=0