[SEL] carb_fueling problem

[Clint D]

JB

I am running an electric fuel pump, and I actually tried another new one just in
case, this motor originally had a diafram type that work off vacuum

Maybe I have a line sucking air? or since I am using two fuel filters, one maybe
stopped up?

Clint

----- Original Message -----
From: <jbcast at charter.net>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Sunday, July 10, 2005 10:57 AM
Subject: Re: Re: [SEL] carb_fueling problem


>
> > > its likely that the needle and seat is sticking or partially blocked
> >
> > OK, I to am guessing that the needle is sticking, but what can U do about it
since
> > I have put a new one in?
> >
> > Clint
> It's not likely that the needle is sticking while it's running, that usually
happens when it's stopped. Have you checked fuel pressure? Put a gauge on it and
run it.
> J.B. Castagnos
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>