[SEL] Hercules & Economy piston pattern project comes together.

[Richard Strobel]

Kewl..we'll be lookin' forward to it.  Maybe Rowlands could give us a tour 
thru his foundry also.  This area was full of foundaries in the ole days. 
They are all gone now.  The one I know of sold most of their patterns but 
there is a cafe in town called "The Pattern Shop."  Will have to stop in and 
take some pictures of what they got on the wall.

later,
Rick


----- Original Message ----- 
From: "Curt" <curt at imc-group.com>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Wednesday, January 26, 2005 9:24 AM
Subject: Re: [SEL] Hercules & Economy piston pattern project comes together.


> Rick,
> Have been working on a web page exactly as you describe but it will be a
> little bit longer 'till I get it finished. It is detailing several
> Stickney parts.
> Yup, the blank piston is for your size Economy. Fits the 1 1/2 thru 2 HP
> engines w/ 3.25 bore.
> Curt
>
> Richard Strobel wrote:
>
> >Well needless to say, Corky and I are most impressed!  Could you please 
> >take
> >us thru the whole process....say "Casting 101 for Dummies?".....preciate 
> >it.
> >
> > Wonder if that would fit the 1 3/4 Economy drag saw I have..I'll measure 
> > it
> >up.
> >
> >
> >
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>