[SEL] NW Swap Meets

[Curt]

Dwight,
I need to make a gas tank for my 8HP Famous. Could I trouble you for a 
drawing/sketch of that tank to help me make one correctly?
For several years I have been using a temporary little round tank, but I 
need to get it back to original. It's tucked behind the front frame bolster.
Here is a pict of the engine.
http://www.oldengine.org/members/gamtra/images/CottonGinningDays2004/PA090003.JPG
Curt

Vivas1993 at aol.com wrote:

>Hi Rick,
> The 2 holes through the gas tank are for mounting it. I have an 8hp IHC 
>Famous, and 2 threaded rods go through the tank, and bolt through 2 pieces of wood 
>under the tank, this is the original way the tank was supported
> The wood is looks like a piece of 1 X 6. 
> Good luck,
> Dwight,
> Matoaca, VA.
>_______________________________________________
>SEL mailing list
>SEL at lists.stationary-engine.com
>http://www.stationary-engine.com/mailman/listinfo/sel
>
>
>  
>