[SEL] Propane regulators & Bessemer Status

[George & Norma Armstrong]

Thx. Arne,
  Kent and Dave had filled me in on the Coolsprings episode and I knew Craig
had taken some parts to work on and I was truly curious about the engines
status.     Geo.
-----Original Message-----
From: fero_ah at city-net.com <fero_ah at city-net.com>
To: The SEL email discussion list <sel at lists.stationary-engine.com>
Date: Sunday, February 13, 2005 1:50 PM
Subject: Re: [SEL] Propane regulators & Bessemer Status


>Hi George,
>
>I had taken the Bessemer half-breed to Coolspring for the June show which
>featured half-breeds.  I wasn't real hopeful as work on it at home had
>indicated that the compression was probably just too low to run.
>
>We all experimented with it at Coolspring and the consensus was cylinder
bore,
>possibly spray the piston, and new rings.  So the piston and cylinder went
home
>with Craig Prucha and took their place in line in his shop.  The good news
is
>as soon as the project that's on the machines now is finished, the Bessemer
>cylinder is next up.  Watch this space for work in progress...
>http://www.antique-engine.com/shopwork/shopwork33.htm
>
>See ya,  Arnie
>
>Quoting George & Norma Armstrong <gnarmstrong at netnitco.net>:
>
>>    How is the Bessemer progressing?      George
>
>_______________________________________________
>SEL mailing list
>SEL at lists.stationary-engine.com
>http://www.stationary-engine.com/mailman/listinfo/sel