[SEL] Propane regulators

[Tom Smith]

Great. Thanks for the email. I'll give Jake a call and see if they are all 
spoken for. If not, I'll put my name in the hat for one.

Have a nice weekend,
Tom

----- Original Message ----- 
From: "Dave Rotigel" <rotigel at alltel.net>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Saturday, February 12, 2005 9:43 AM
Subject: Re: [SEL] Propane regulators


> Hi Tom,
>         Jake will have the regulators at Coolspring this year. You can 
> also reach him by phone at: 724.295.4643. Mornings are best since he works 
> 2nd shift. I just talked to Jake and he is going to look into what the 
> shipping cost (USPS) would be. Don't think it would be too much!
>         Dave
>
>>Hi Dave,
>>How would one get in touch with Jake to obtain one of these regulators?
>>Thanks,
>>Tom
>>
>>>Hi Dallas,
>>>>Has anyone run a engine on a "on-demand" propane regulator? I am 
>>>>speaking
>>>>about oil field type engines but  could be used on any other engine.
>>>
>>>Jake faith ran several of his engines on them last year. Worked well and 
>>>saved A LOT. They ran on about 1/8 (or less) of the propane usually 
>>>needed! Jake has an order in for 20 of the units and will be selling them 
>>>for $100.00. That will include everything that you need--ie both 
>>>regulators, the hose and the fittings etcDallas
>>>         Dave
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>