[SEL] Belt Dressing

Dave Mayfield wrl at gwltd.com
Mon Feb 7 05:00:48 PST 2005


You are right Rob, but you did not consider that the pulley on a JD B, is
much smaller than the puller on the grinder, so the belt is the proper size.

J. Dave Mayfield
www.w9wrl.com
----- Original Message -----
From: "Rob Skinner" <rskinner at rustyiron.com>
To: "'The SEL email discussion list'" <sel at lists.stationary-engine.com>
Sent: Monday, February 07, 2005 12:42 AM
Subject: RE: [SEL] Belt Dressing


>
> > Where can I buy old fashion belt dressing?
> >
> > This weekend as the weather was so nice 56 and sunny here.
> > Western Illinois. I thought I had better make good use of it.
> > So Friday morning after I fed my Chickens and the dog, and
> > while the ground was frozen somewhat. I moved all my
> > equipment in place, so on Saturday I could grind some chicken
> > feed. I use my John Deere 48 b and an old Letz 220 grinder,
> > anyone ever was one of these. Works real well, only trouble I
> > have is that I don't have any good belt dressing. I was using
> > a spray can of dressing, but it's not for big belts. If I put
> > to much corn in the hopper I would loose traction and things
> > would GRIND to a halt. My daughter took some pictures, and I
> > uploaded them to my server if you would like to have a look.
> > So any one know where I can order the good stuff?
>
> Hi Dave,
> Thanks for sharing the pictures!
>
> My source of stick dressing dried up, so I can't help you with that.  But
> looking at the last picture, I notice that the pulley is twice as wide as
the
> belt.  The amount of work a flat belt can transmit is directly
proportional to
> it's width.  Get a belt of the proper width, and your slippage problems
will be
> alleviated.
>
> Rob
>
>
>
>
> =-=-=-=-=-=
> Rob Skinner
> La Habra, California
> mailto:rskinner at rustyiron.com
> http://www.rustyiron.com
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>




More information about the sel mailing list