[SEL] goulds mfg co seneca salls ny

[peter ogborne]

Craig..............we restored a Tangy triple throw pump some years ago. At 
the time I found a site on the net in the UK . A group were restoring a 
Tangy engine and the same type of pump as ours. Sounded like a nice set up . 
Engine and pump in the original engine house with a glass panel for viewing. 
If you wish I can send you a pic of our pump ...we now drive it with a 
Ruston Proctor Steam Portable.
----- Original Message ----- 
From: "craig morrison" <benzengines at tiscali.co.uk>
To: <SEL at lists.stationary-engine.com>
Sent: Tuesday, December 06, 2005 6:15 AM
Subject: [SEL] goulds mfg co seneca salls ny


>    Hi all,
>            I am in the process of restoring a triplex pump made by 
> goulds.The pump measures about14 inches wide by about 20 inches high the 3 
> brass pistons are 2 1/4 inches in diameter and it weighs approx 170 
> pounds.
>            The only other one that I have seen was in the gas engine shed 
> at Baraboo, but it is huge in comparisom. Any information on this type of 
> pump or its age would be very useful as would anything about the 
> manufacturer.
>
>        Thanks in advance,
>                                     Craig in a very wet Scotland
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>
>