[SEL] Lineshaft equipment

[Richard Strobel]

Thank you Jeff for the nice pictures..very educational

RickinMt.


----- Original Message ----- 
From: "Jeff Allen" <transteck at earthlink.net>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Monday, August 01, 2005 6:07 PM
Subject: Re: [SEL] Lineshaft equipment


> OOPS!! :-(
> 
> http://oldirongallery.com/LS.html
> 
> Jeff Allen wrote:
> 
> > Hi Rick,
> >
> > Here are the lineshaft pictures I took this weekend. They are from the 
> > blacksmith shop in Bird City. I shrunked em down a bit. Anyone wants 
> > full size contact me and I'll build another page. Huge files. The 
> > machine next to the lathe appears to be a mill. The project in the 
> > vice looked like a bolt they were cutting the head on. Not running 
> > while I was there.
> >
> > Jeff Allen
> >
> > Richard Strobel wrote:
> >
> >> Well this weekend, Corky got two of those IR radial, horizontal, 
> >> engine/compressors, 1 very nice HUGE drill press (about a 30" table, 
> >> w/#4 morse taper) which we'll use on the lineshaft and I got a nice 
> >> kiln.
> >>
> >>  So now we have a metal lathe, power hacksaw, drill press, and 
> >> possibly a bench grinder.  What other type of equipment was used in 
> >> the ole mom and pop lineshaft driven machine shop??
> >>
> >>  We are led to believe that a lineshaft turns ~400 rpm..correct me if 
> >> I'm wrong.
> >>
> >>  Thanks gang in anticipation
> >> RickinMt. _______________________________________________
> >> SEL mailing list
> >> SEL at lists.stationary-engine.com
> >> http://www.stationary-engine.com/mailman/listinfo/sel
> >>
> >>
> >>  
> >>
> >
> > _______________________________________________
> > SEL mailing list
> > SEL at lists.stationary-engine.com
> > http://www.stationary-engine.com/mailman/listinfo/sel
> >
> >
> 
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>