[SEL] Economy moving parts

[Steve Royster]

Stove polish looks nice also!  Steve

>From: "Rex Hinz" <rexhinz at chorus.net>
>Reply-To: The SEL email discussion list <sel at lists.stationary-engine.com>
>To: <sel at lists.stationary-engine.com>
>Subject: [SEL] Economy moving parts
>Date: Wed, 20 Apr 2005 18:42:41 -0500
>
>Hi All;
>
>      I'm in the middle of restoring my Economy 2-1/2/HP E and because of 
>the
>very rusty and ugly paint (not orignal paint) I have decided repaint it ,
>the push rod , govenor assembly and most of the moving parts were painted
>with thick black paint , I have remved the paint and did electrolis to
>remove all rust, I then dipped the parts in mag wheel aluminium
>brightner(full strength) for a few seconds and they came out bright shinny
>cast iron parts I then washed all the acid off and was going to paint them,
>instead I am woundering how gun blueing or browning would work on cast iron
>, it would look better and would not interfere with the mag trip , anybody
>do this with good results ?  thanks for reading , I know there was a thread
>on this a while back but I missed most of it,
>
>Rex Hinz
>
>PS, the Economy will soon be breathing again .
>
>
>_______________________________________________
>SEL mailing list
>SEL at lists.stationary-engine.com
>http://www.stationary-engine.com/mailman/listinfo/sel