[SEL] When all else fails

[Richard Strobel]

Let's forget that BF gang...It only runs close to 200 rockets.  Unless of 
course Arnie buys one and we can borrow.

Upward and onward
RickiMt.


----- Original Message ----- 
From: "Arnie Fero" <fero_ah at city-net.com>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Sunday, April 17, 2005 12:19 PM
Subject: Re: [SEL] When all else fails


> Hi Rick,
>
> That's a pretty useful looking tip!  I think I need one!
>
> As to using it on a drilled gib key, personally I wouldn't do it.
> The cutting torch wouldn't bother the cast iron hub of the flywheel, but I
> think there would be a really high probability of flame-gouging the keyway
> in the crankshaft.
>
> See ya,  Arnie
>
> Arnie Fero
> Pittsburgh, PA
> fero_ah at city-net.com
>
> On Sun, 17 Apr 2005, Richard Strobel wrote:
>
> > I found this extended tip for a gas axe.  For removing a key wouldn't 
> > this
> > work good after drilling all the way thru the key?
> > http://www.thermadyne.com/vec/literature/pdfs/094_65-2007.pdf
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>