[SEL] Felix or Electra Engines

[John Hammink]

Hi Andy, are you talking about an engine like this?
http://www.oldengine.org/members/hammink/FelixRenauer3hp1914.jpg

Regards,
John Hammink
Anna Paulowna, Netherlands.
jg.hammink at quicknet.nl
www.oldengine.org/members/hammink/web




> Hello All, I keep running this question now and again in the hope some day
> some one will be able to help? Just before moving from the East coast to the
> West coast, 4 years ago, I purchased a Felix Engine, which is still stored
> on the East coast awaiting my return. I'm after any information about these
> engines, I have only photo's of the engine I've in storage and can only
> describe from looking at the photo's and from memory. It's a single
> cylinder, 3.5hp, "F" type head/Barrel and has a brass tag with "Bartrum
> Bor's Brisbane" or Bertrum, I couldn't find an engine # but have since been
> told that it's in-between the Core plugs fittings on the top of the head.
> I've phoned numerus times to the Timms brothers, and I've even sent photo's
> of the engine with a return stamped envelope, asking for their help. I think
> I made the mistake of telling them that this engine wasn't for sale and this
> is the reason for the silence. I was warned of this by an other engine
> collector who has had the same treatment. So if there is any one out there
> who can point me in the right direction I'd be very grateful.
> Andy....
> 
> Andy Nicholson
> Exmouth W.A.
> Oz.
> rustyiron at bigpond.com
> 
> 
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel