[SEL] Please critique

[nick]

Hi curt 
          it all looks good to me maybe a bit moor info on the measurement
for anybody 
without a CNC type readout  
 
Nick Holden
Banbury 
Oxfordshire (UK)
nick at holden1.net
http://community.webshots.com/user/moxydumper
-------Original Message-------
 
From: Curt
Date: 04/14/05 16:19:46
To: SEL
Subject: [SEL] Please critique
 
Guys,
As you may recall I developed some patterns for making the small
Herc/Econ pistons with the 3.250 bore. These are made over sized so they
may be fitted to oversize bored engines. Several customers have
requested I provide a step by step machining procedure and I decided to
try this pictorial version. I was hoping you might critique it and tell
me what I might add, change, or improve.
Thanks for any suggestions you can offer.
Curt Holland
Gastonia, NC
http://www.oldengine
org/members/holland/images/PistonMachiningSteps/Thumbnails.html
 
 
_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel
 
 
--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.9.9 - Release Date: 13/04/2005