[SEL] Hardy motorworks

[Jim Bethell]

Rob, Thanks for info, have now attached photos on web shots under Hardy
engine. This guy is prepared to actually cast/make another head, valves
rocker etc. He is only really missing the top end as the photos show and
ignition system but don't know any sizes, type etc.
regards
Jim
----- Original Message -----
From: "Rob Skinner" <rskinner at rustyiron.com>
To: "'The SEL email discussion list'" <sel at lists.stationary-engine.com>
Cc: "'Cliff Northcote'" <c_northcote at nfmhc.com>
Sent: Saturday, 9 April 2005 1:02
Subject: RE: [SEL] Hardy motorworks


>
> > -----Original Message-----
> > From: Jim Bethell [mailto:bethell1 at iinet.net.au]
> > Sent: Friday, April 08, 2005 5:41 AM
> >
> > One of our Club members has an engine marked Hardy Motor
> > works, Port Huron, Michigan also marked no 5a. It has a bore
> > of 3 3/4" and stroke of 6" and would have had a 5 stud head
> > if it was attached!! All workings are internal but he has
> > been told Hardys were around in 1901so would be very unusual.
> > Can anyone help with info on these engines?
> > regards
> > Jim Bethell
>
>
> Hi Jim,
> You should contact Cliff Northcote <c_northcote at nfmhc.com>  He told me
that
> there are only three Hardys remaining and his is the only engine that
runs.  Is
> your mate's Hardy one of the three, or could there be four engines?
>
> You can see a picture of Cliff's engine by visiting the following web page
and
> clicking on the ninth link on the left:
http://rustyiron.com/engines/santee04
>
> =-=-=-=-=-=
> Rob Skinner
> La Habra, California
> mailto:rskinner at rustyiron.com
> http://www.rustyiron.com
>
>
>
>
>
>
>
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.308 / Virus Database: 266.9.5 - Release Date: 7/04/05
>
>