[SEL] Parking lot shows

[Richard Fink Sr]

Hi Joe check around at your local tire and repair shops. You will find worn 
out rotors that are smaller and work as good as rims. Also just make a 
small cut in chain links and weld to up rite then just slide rope in each 
one.[[just my HO]]
R Fink




At 08:35 PM 4/5/2005, you wrote:

>  <Being partially
>open allows you to easily slip a small rope in it when it is welded on
>the end of
>the rod.  Keeps you from having to thread the rope thru a bunch of
>holes.>
>
>The Monkey Link sounds like a good idea.
>What I did was to make 3/8" re-bar stanchions and weld a 3/4" washer
>about 3" from the top.
>You can slip a loop through the washer and over the top of the rod and
>it's good to go.
>If you need to take a section down to let someone drive in or out, just
>take the loop over the top
>and slip it out of the washer. Presto !
>
>For the base I probably would use old tire rims.
>They're redily available in the local woods - FREE !!!
>
>Joe "Pip" Betz said that.
>jlb94 at juno.com
>  ,-._,-.         "Taxes could be worse - suppose
>  \/)"(\/        we had to pay on what we thing we're worth."
>  (_o_)          http://community.webshots.com/user/pipbetz
>_______________________________________________
>SEL mailing list
>SEL at lists.stationary-engine.com
>http://www.stationary-engine.com/mailman/listinfo/sel