[SEL] Saw Outfit Blade finish

[Richard Strobel]

Thanks Pip...I'll oiler up and see what I get.

Take Care,
Rick


----- Original Message ----- 
From: <jlb94 at juno.com>
To: <sel at lists.stationary-engine.com>
Sent: Thursday, September 23, 2004 1:47 PM
Subject: Re: [SEL] Saw Outfit Blade finish


>   Any suggestions as what kind of finish to use on the circular saw
> blade? 
> I believe it's ~30 inches in diameter.  I've got it blasted now.
> =        =        =        =        =        =        =
> Hi Rick,
> 
> I wire wheeled mine to get the heavy rust off - then kept it oiled.
> 
> If you're going to use it, I wouldn't try for a real nice finish.  The
> oil gave a nice dark finish.
> 
> 
> Joe "Pip" Betz said that. 
> jlb94 at juno.com
>  ,-._,-.          "Toys are so sophisticated these days 
>  \/)"(\/           that they can play with each other."
>  (_o_)          http://community.webshots.com/user/pipbetz
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>