[SEL] decal question please

[Richard Strobel]

Thanks guys..will give it a go.

Curt, Hit&Miss has the Herc decals.

later,
RickinMt.



> Trimming a water WT will not ruin it.  If the decal has excess carrier 
> film it should be trimmed close with a very sharp blade.  Also you will 
> need a smooth gloss surface if you want that decal to stay on and for the 
> carrier film to dissappear.  Also make sure the surface is CLEAN.  Wetting 
> the surface will help prevent trapped air and silvering.
>
>
>
> Curt Holland <curt at imc-group.com> wrote:
> Rick,
> If you have a good surface behind you will not need to trim your water
> transfer decal. It absolutely will disappear as it dries. Beside
> trimming would ruin a WT decal.
> Curt Holland
> P.S. Where can Hercules WT decals be bought? I used all mine on the Herc
> saw rig. Need 4 more.....
>
> Richard Strobel wrote:
>
> > Howdy all...live is good!!!
> >
> > On the Economy I used a peal and stick decal..cut and trimmed the
> >transparent material off so it looked like a stencil job. I like this 
> >look.
> >
> > Now on the Galloway hopper I have a water transfer decal. Question is:
> >Will I be able to peal the transparent material off (the hopper) so I 
> >have
> >the same stencil looking effect?
> >
> > Appreciate any advise!!
> >
> >
> >
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>
>
> Cheers!  NICK
>
>
> Visit the home of Fuller & Johnson engines on the web!
>
> "He who sees the other first already has half the victory."   Erich 
> Hartmann
>
> "Verloren ist nur, wer sich selbst aufgibt"  Hans Rudel
>
>
>
>
>
>
>
>
>
>
>
> ---------------------------------
> Do you Yahoo!?
> Yahoo! Mail is new and improved - Check it out!
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>