[SEL] Re: Glenn's Engine Starting

[Arnie Fero]

Glenn,

I think I see your problem...

Open the compression release or hold a valve open to bring the piston up
onto compression furthur than you could normally pull it.  THEN pull it
the rest of the way!  Easy peasy.  You'll need to experiment to find the
optimum point to close the valve or compression release.

See ya,  Arnie

Arnie Fero
Pittsburgh, PA
fero_ah at city-net.com

On Mon, 6 Sep 2004, Glenn Wilson wrote:

> This engine starts GREAT if you can get it over compression ...

<snip>

> >Usually the key is to relieve some compression while maintaining enough
> >charge to fire.