[SEL] Sattley 2 HP

[Jim O'Hagan]

Hi Jeff,
 Starbolt lists one for a 2HP solid flywheel Sattley. Ask some questions
first, but it sure beats building one from scratch.  CYA,  Jimmy O'Hagan

Jim O'Hagan
-----Original Message-----
From: sel-bounces at lists.stationary-engine.com
[mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of Jeff Allen
Sent: Wednesday, September 01, 2004 7:23 PM
To: The SEL email discussion list; stationary-engine at oldengine.org
Subject: [SEL] Sattley 2 HP

Hello all,

Does anyone have a good picture of the rocker arm/head/valve actuating arm
for a 2 HP Sattley. Seems it is different than the 1 1/2 HP Sattley. I'm
talking about the later solid flywheel type Sattley, sometimes called the
New Sattley. Started the 1 3/4 and 2 HP about 1930 and the plug goes into
the side of the head instead of the front. Any help is appreciated and I'll
pass it on to the man that inquired to me. Off list is fine as well as large
files. He has to make a rocker arm, so detail is important. Thanks in
advance.

 Regards,

Jeff Allen
Arvada, Colorado USA

http://oldengine.org/members/allen/
http://frapa.us/
_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel