[SEL] Another engine running

[Harry Terpstra]

Thanks Wayne,
Will try if it helps to make it 1½" as well.


H.Terpstra
Sint Anna Parochie
Netherlands
h.terpstra at wxs.nl
http://home01.wxs.nl/~terps027/home.html



----- Original Message -----
From: "Wayne Thackery" <wayne at lorenssanitation.com>
To: "'The SEL email discussion list'" <sel at lists.stationary-engine.com>
Sent: Tuesday, November 16, 2004 10:00 PM
Subject: RE: [SEL] Another engine running


>
> Greetings,
>
> Harry, I have measured all four and they all measure just a hair under 1
> 1/2". Hope this helps!
>
> Wayne A Thackery
>
> -----Original Message-----
> From: sel-bounces at lists.stationary-engine.com
> [mailto:sel-bounces at lists.stationary-engine.com]On Behalf Of Harry
> Terpstra
> Sent: Tuesday, November 16, 2004 11:24 AM
> To: The SEL email discussion list
> Subject: Re: [SEL] Another engine running
>
>
> The intake valve is seating well!
> When i turn over the engine by hand (against compression) I don't hear any
> "hissing" in the carburator.
>
> Yes we have a few other engines on propane too, like our 4 HP ball hopper
> Monitor, and we have great luck with it as well.
>
> Wayne can you do me a favor? Can you meassure the distance between the top
> of the mixer to the top of the overflow pipe?
> On our engine it's 40 mm  (1  9/16")  maybe it's to high?
>
> Thanks
>
> H.Terpstra
> Sint Anna Parochie
> Netherlands
> h.terpstra at wxs.nl
> http://home01.wxs.nl/~terps027/home.html
>
>
>
> ----- Original Message -----
> From: "Wayne Thackery" <wayne at lorenssanitation.com>
> To: "'The SEL email discussion list'" <sel at lists.stationary-engine.com>
> Sent: Tuesday, November 16, 2004 5:12 PM
> Subject: RE: [SEL] Another engine running
>
>
> > Greetings Harry,
> >
> > Glad to hear you have gotten it to run! I have both the 2 and 3 HP IHC
> > Verticals in both the air cooled and hopper cooled and have yet to have
> any
> > trouble like you have described. Is your intake valve seating all the
way
> > closed? I also have a few engines that I run on propane and have great
> luck.
> > You'll get it figured out. Stick with it!
> >
> > Wayne A Thackery
> >
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel