[SEL] Another engine running

[Wayne Thackery]

Greetings,

Harry, I have measured all four and they all measure just a hair under 1
1/2". Hope this helps!

Wayne A Thackery

-----Original Message-----
From: sel-bounces at lists.stationary-engine.com
[mailto:sel-bounces at lists.stationary-engine.com]On Behalf Of Harry
Terpstra
Sent: Tuesday, November 16, 2004 11:24 AM
To: The SEL email discussion list
Subject: Re: [SEL] Another engine running


The intake valve is seating well!
When i turn over the engine by hand (against compression) I don't hear any
"hissing" in the carburator.

Yes we have a few other engines on propane too, like our 4 HP ball hopper
Monitor, and we have great luck with it as well.

Wayne can you do me a favor? Can you meassure the distance between the top
of the mixer to the top of the overflow pipe?
On our engine it's 40 mm  (1  9/16")  maybe it's to high?

Thanks

H.Terpstra
Sint Anna Parochie
Netherlands
h.terpstra at wxs.nl
http://home01.wxs.nl/~terps027/home.html



----- Original Message -----
From: "Wayne Thackery" <wayne at lorenssanitation.com>
To: "'The SEL email discussion list'" <sel at lists.stationary-engine.com>
Sent: Tuesday, November 16, 2004 5:12 PM
Subject: RE: [SEL] Another engine running


> Greetings Harry,
>
> Glad to hear you have gotten it to run! I have both the 2 and 3 HP IHC
> Verticals in both the air cooled and hopper cooled and have yet to have
any
> trouble like you have described. Is your intake valve seating all the way
> closed? I also have a few engines that I run on propane and have great
luck.
> You'll get it figured out. Stick with it!
>
> Wayne A Thackery
>


_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel