[SEL] John Deere H

[Luke Tonneberger]

Hi Dave,

If nobody can help you out, you might want to join the John Deere list that 
ATIS hosts. I've been on it for a couple months since buying a GP. Seems to 
be some pretty knowledgable guys on there.

Luke Tonneberger
Rockford, Michigan
USA
==================
>From: "Dave Ernst" <shop at cccomm.net>
>Reply-To: The SEL email discussion list <sel at lists.stationary-engine.com>
>To: "Engine List" <sel at lists.stationary-engine.com>
>Subject: [SEL] John Deere H
>Date: Fri, 12 Nov 2004 13:27:08 -0800
>
>I have taken on a project for an acquaintance that owns this H. He has had 
>it apart for more than 5 years and admitted that he was in over his head. 
>He purchased th overhaul kit and has had the head an valves done. What I 
>need to know if anybody out there knows what in intake/exhaust clearances 
>are and what the rods bearings should be set at.
>
>Thanks in advance
>Dave