[SEL] Weld Mold 706

Luke Tonneberger flywheelin at hotmail.com
Wed Nov 10 03:59:30 PST 2004


A search on google.....second hit provided the info below.......... I picked 
some up but have the info at home. If I remember right they sent me about 6 
sticks for free to try out.  I have been very satisfied the few times I have 
used it. It flows like butter.

Luke Tonneberger
Rockford, Michigan
USA
-------------

Date: Fri, 9 Mar 2001 10:06:37 -0500 (EST)
From: Arnie Fero x4891 E-478 <feroa at venus.pgh.wec.com>
Subject: Re: Cast welding-new info on 706 rod

Hi Folks,

There have been a number of requests for the "source" info that
John Wilkens provided for Weld Mold 706 rod for no-preheat cast
iron welding.  Here tis...

BTW my two pounds arrived last week...  Not tried it yet.

See ya,  Arnie

- ----- Begin Included Message -----

>From owner-stationary-engine at newidea.atis.net Fri Feb 23 10:44:16 2001

Hi Folks,

I just got off the phone after chatting with Greg.  As John said, he's
fantastic to deal with.  I'd say this should be THE "SEL Source Site"
for ordering Weld Mold 706 rod.  I've got two pounds "in the mail."

Thanks John for posting this!!!

See ya,  Arnie

Arnie Fero
Pittsburgh, PA
feroa at vemnus.pgh.wec.com

>For those interested in the prior thread on Bob's good experience with Weld
>Mold 706 rod, I found a source that will sell the 1/8" 706 stick rod in
>less that 10 pound tubes.  The price is good--about $11.50/lb.  Contact
>Greg (Branch Mgr.), AFA Gas, Danville, Il.  217-443-0204.  UPS shipping OK.
>  Nice fellow to deal with.   John W.
>
>                       John Wilkens

==========================================================
>From: Jim French <fbi at insulate.co.uk>
>Reply-To: The SEL email discussion list <sel at lists.stationary-engine.com>
>To: Stationary Engine List <sel at lists.stationary-engine.com>
>Subject: [SEL] Weld Mold 706 Date: Tue, 09 Nov 2004 22:22:06 +0000
>
>Hi
>
>I've had someone ask where these rods can be obtained.  Any ideas,
>anyone?
>
>Thanks,
>
>Dolly
>
>--
>Jim French
>fbi at insulate.co.uk
>http://www.insulate.co.uk





More information about the sel mailing list