[SEL] Sort of OT: Odd iron on building

[Dave Croft]

----- Original Message ----- 
From: <EnginePaul at aol.com>
To: <sel at lists.stationary-engine.com>
Sent: Thursday, November 04, 2004 2:41 PM
Subject: Re: [SEL] Sort of OT: Odd iron on building
Big Snip
> Of course the best fit in the opinion of the builder is probably a good 
> explanation. Shorter buildings are usually vertical so you won't have to trim as 
> many panels. If I were building a shed, I'd make the side as high as the closest 
> standard sheet.
> Paul,

Perhaps if you lean your broom against the wall it isn't as likely to slip sideways. 8^)
Dave Croft