[SEL] Conn rod slop

[Chuck Balyeat]

>    Possibly this is an undue concern and the rod seeks its own center
> (inside the piston

It'll stick or bind if it cant flop around , you crank aint perfectly plumb
.
Binding will make it wear out faster . Even in my climate  , I wouldnt sweat
it .
The crank on my stirling is a little out of whack and every once in a while
I have to loosen the screw on the big end bearing and slide it over just a
nudge
or it will slap against the piston at one end of the stroke . tak tak tak
tak tak