[SEL] Need Stover Help!

[Paul Maples]

Harry even with the exhaust valve depressed the fuel saver arm still doesn't
quite come into contact with the valve keeper. It looks like I will need to
make one out of steel and put a slight bend in it. I have seen some of these
fuel saver arms that was bent on the end (they were original). I use to have
some pictures of them but you guessed it, they were stored on the computer
and was lost in the crash. This time I am downloading all of my pictures
onto a disk to make sure this does not happen again.

I appreciate you Harry. Don't forget to resend me your address.

Paul

----- Original Message ----- 
From: "Harry Terpstra" <h.terpstra at wxs.nl>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Saturday, July 17, 2004 1:18 PM
Subject: Re: [SEL] Need Stover Help!


> Paul,
> I looked at the pictures you posted, and like Joe, I think it's really
close
> to be working properly.
> On your pics the rocker arm is not in "freewheel" position.
> I guess it should work now with the right spring to push it under the
valve
> keeper.
>
>
> Harry Terpstra
> Sint Anna Parochie
> Netherlands
> h.terpstra at wxs.nl
> http://home01.wxs.nl/~terps027/home.html
>
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>
>