[SEL] Big engine starting wheels?

Keith Kinney kkinney at herculesengines.com
Tue Jul 6 14:57:44 PDT 2004


Glenn
If you look around at the pictures I have posted on these two web sites you 
will see several variations of pony motor setups that people have used to 
start their big engines.
http://www.herculesengines.com/OFES/Portland2002.htm
http://www.herculesengines.com/OFES/Elnora2002.htm

Then for the smaller engines is this really neat setup.  Maybe you could 
scale this idea larger.
http://www.herculesengines.com/starter/
Keith


At 07:17 AM 7/5/2004, you wrote:
>No - I've been lazy. The head isn't even off it.
>The 60 starts with air :)
>
>I'm mounting a 22.5HP Bessemer on steel wheels and wondering
>how to start it. I'm not as strong as I used to be and I know they turn
>HARD. My little 15HP half breed starts ok but it only has one flywheel.
>I just doubt I can start the 22.5HP myself without help and I'm
>thinking of doing it the easy way with a little engine.
>Glenn
>
>-----Original Message-----
>From: sel-bounces at lists.stationary-engine.com
>[mailto:sel-bounces at lists.stationary-engine.com]On Behalf Of Richard
>Fink Sr
>Sent: Monday, July 05, 2004 9:56 AM
>To: The SEL email discussion list
>Subject: Re: [SEL] Big engine starting wheels?
>
>
>Hi Glenn it appears you may be ready to start that 60 hp??????????????
>R Fink
>PA
>
>
>
>
>
>
>At 11:19 PM 7/4/2004 -0400, you wrote:
> >What suggestions do you folks have for those of us with BIG engines
> >who are going to try starting them with a little engine and a rubber
> >wheel? I know if it is done wrong, it can suck the engine in and bust
> >the flywheel or worse.
> >Thanks, Glenn Wilson
> >_______________________________________________
> >SEL mailing list
> >SEL at lists.stationary-engine.com
> >http://www.stationary-engine.com/mailman/listinfo/sel
>
>
>_______________________________________________
>SEL mailing list
>SEL at lists.stationary-engine.com
>http://www.stationary-engine.com/mailman/listinfo/sel
>
>
>_______________________________________________
>SEL mailing list
>SEL at lists.stationary-engine.com
>http://www.stationary-engine.com/mailman/listinfo/sel

Keith Kinney
Evansville, Indiana USA
kkinney(N0 Spam)@HerculesEngines.com - Please remove the (N0 Spam)
WWW.HerculesEngines.com

To join the Hercules Engines e-mail list send an email to:
         HerculesEnginesGroup-subscribe at yahoogroups.com





More information about the sel mailing list