[SEL] Shingle Mill

[George & Norma Armstrong]

Hi Luke,
  We use cedar in our club shingle mill and it is usually sawn for us into
the correct size blocks by another clubs sawmill.   Best wishes for the new
year.    George
-----Original Message-----
From: Luke Tonneberger <flywheelin at hotmail.com>
To: sel at lists.stationary-engine.com <sel at lists.stationary-engine.com>
Date: Friday, December 31, 2004 7:54 PM
Subject: Re: [SEL] Shingle Mill


>Hi George,
>
>Nope, it's not too early. I've had a few guys already asking if I could cut
>them some. The main problem for me will be finding wood to use for the
>shingles.  Would want to make sure it is nail and metal free.  I know that
>cedar is popular, but finding it could be a problem. Not sure what other
>types of wood can be used for shingles.
>
>Luke Tonneberger
>Rockford, Michigan
>USA
>=======================
>>From: "George & Norma Armstrong" <gnarmstrong at netnitco.net>
>>Reply-To: The SEL email discussion list <sel at lists.stationary-engine.com>
>>To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
>>Subject: Re: [SEL] Shingle Mill
>>Date: Wed, 29 Dec 2004 10:00:15 -0600
>>
>>Luke,
>>   Is it to early to place an order for shingles??       George
>
>
>_______________________________________________
>SEL mailing list
>SEL at lists.stationary-engine.com
>http://www.stationary-engine.com/mailman/listinfo/sel