From rotigel at me.com Fri Mar 3 16:57:12 2017 From: rotigel at me.com (Dave) Date: Fri, 03 Mar 2017 19:57:12 -0500 Subject: [SEL] A GREAT Description! Message-ID: See: https://biggeekdad.com/2010/11/turbo-encabulator/ This is a historical film. This invention is now common place and used widely by the extreme left end of the liberal-ites spectrum who are circumscribing the nether regions of the orifice to the rear of the relative trajectory in a reverse operational mode. It is know for its ability to produce an inordinate amount of fecal deployment, almost non-stop and self perpetuating. Recently, it has now morphed into an ability to self-replicate and produce equally and parallel quantities of fake tele-castic emissions. At this point. the EPA is dumfounded and supportive (at the same time) of this definitive eschatological intervening development, regardless of the potential harm it may eventually and presently cause. Just amazing! From rdhaskell at juno.com Fri Mar 17 12:04:13 2017 From: rdhaskell at juno.com (rdhaskell at juno.com) Date: Fri, 17 Mar 2017 12:04:13 -0700 Subject: [SEL] Hay press value Message-ID: Hi all. I would like a ball park value on a hay press like this. Looks like a couple hours tinkering it would make bales. Thanks Ron Haskell rdhaskell at juno.com Riverside, California USA https://plus.google.com/104862591013550196821/posts -------------- next part -------------- A non-text attachment was scrubbed... Name: 6121746_2.jpg Type: image/jpeg Size: 27095 bytes Desc: not available URL: From rotigel at me.com Fri Mar 17 13:13:17 2017 From: rotigel at me.com (Dave) Date: Fri, 17 Mar 2017 16:13:17 -0400 Subject: [SEL] [AT] Hay press value In-Reply-To: References: Message-ID: <4B9214D8-2845-4DAA-889F-5C8C5C96F92E@me.com> What is the engine, Ron? Dave > On Mar 17, 2017, at 3:04 PM, rdhaskell at juno.com wrote: > > Hi all. > I would like a ball park value on a hay press like this. Looks like a > couple hours tinkering it would make bales. > Thanks > > Ron Haskell > rdhaskell at juno.com > Riverside, California USA > https://plus.google.com/104862591013550196821/posts<6121746_2.jpg>_______________________________________________ > AT mailing list > http://www.antique-tractor.com/mailman/listinfo/at From rotigel at me.com Fri Mar 3 16:57:12 2017 From: rotigel at me.com (Dave) Date: Fri, 03 Mar 2017 19:57:12 -0500 Subject: [SEL] A GREAT Description! Message-ID: See: https://biggeekdad.com/2010/11/turbo-encabulator/ This is a historical film. This invention is now common place and used widely by the extreme left end of the liberal-ites spectrum who are circumscribing the nether regions of the orifice to the rear of the relative trajectory in a reverse operational mode. It is know for its ability to produce an inordinate amount of fecal deployment, almost non-stop and self perpetuating. Recently, it has now morphed into an ability to self-replicate and produce equally and parallel quantities of fake tele-castic emissions. At this point. the EPA is dumfounded and supportive (at the same time) of this definitive eschatological intervening development, regardless of the potential harm it may eventually and presently cause. Just amazing! From rdhaskell at juno.com Fri Mar 17 12:04:13 2017 From: rdhaskell at juno.com (rdhaskell at juno.com) Date: Fri, 17 Mar 2017 12:04:13 -0700 Subject: [SEL] Hay press value Message-ID: Hi all. I would like a ball park value on a hay press like this. Looks like a couple hours tinkering it would make bales. Thanks Ron Haskell rdhaskell at juno.com Riverside, California USA https://plus.google.com/104862591013550196821/posts -------------- next part -------------- A non-text attachment was scrubbed... Name: 6121746_2.jpg Type: image/jpeg Size: 27095 bytes Desc: not available URL: From rotigel at me.com Fri Mar 17 13:13:17 2017 From: rotigel at me.com (Dave) Date: Fri, 17 Mar 2017 16:13:17 -0400 Subject: [SEL] [AT] Hay press value In-Reply-To: References: Message-ID: <4B9214D8-2845-4DAA-889F-5C8C5C96F92E@me.com> What is the engine, Ron? Dave > On Mar 17, 2017, at 3:04 PM, rdhaskell at juno.com wrote: > > Hi all. > I would like a ball park value on a hay press like this. Looks like a > couple hours tinkering it would make bales. > Thanks > > Ron Haskell > rdhaskell at juno.com > Riverside, California USA > https://plus.google.com/104862591013550196821/posts<6121746_2.jpg>_______________________________________________ > AT mailing list > http://www.antique-tractor.com/mailman/listinfo/at