From rotigel at me.com Mon Jul 3 19:16:10 2017 From: rotigel at me.com (Dave) Date: Mon, 03 Jul 2017 22:16:10 -0400 Subject: [SEL] Have A GREAT 4th (OT--not really!) Message-ID: Start an engine, or ride a tractor and See: https://www.youtube.com/embed/TnQDW-NMaRs?rel=0 Dave From cgandree at mchsi.com Mon Jul 31 15:51:10 2017 From: cgandree at mchsi.com (cgandree at mchsi.com) Date: Mon, 31 Jul 2017 18:51:10 -0400 (EDT) Subject: [SEL] John Deere 1 1/2hp E ignitor In-Reply-To: <1570070982.7436992.1501541183376.JavaMail.zimbra@mchsi.com> Message-ID: <181728349.7437237.1501541470907.JavaMail.zimbra@mchsi.com> Ok guys I just rebuilt my magnito on my JD 1 1/2 E and charged it properly. After putting it back on the engine and making sure that the gears were at the marks as before I attempted to start the engine but no go. I removed the ignitor and cleaned and oiled everything so the it would trip properly. Tried to turn it over but still no go. My question is, should the points on this ignitor be open or closed? Mine are closed. Sure would likes some words of wisdom from the group. Thank you in advance. Curt Andree From rotigel at me.com Mon Jul 3 19:16:10 2017 From: rotigel at me.com (Dave) Date: Mon, 03 Jul 2017 22:16:10 -0400 Subject: [SEL] Have A GREAT 4th (OT--not really!) Message-ID: Start an engine, or ride a tractor and See: https://www.youtube.com/embed/TnQDW-NMaRs?rel=0 Dave From cgandree at mchsi.com Mon Jul 31 15:51:10 2017 From: cgandree at mchsi.com (cgandree at mchsi.com) Date: Mon, 31 Jul 2017 18:51:10 -0400 (EDT) Subject: [SEL] John Deere 1 1/2hp E ignitor In-Reply-To: <1570070982.7436992.1501541183376.JavaMail.zimbra@mchsi.com> Message-ID: <181728349.7437237.1501541470907.JavaMail.zimbra@mchsi.com> Ok guys I just rebuilt my magnito on my JD 1 1/2 E and charged it properly. After putting it back on the engine and making sure that the gears were at the marks as before I attempted to start the engine but no go. I removed the ignitor and cleaned and oiled everything so the it would trip properly. Tried to turn it over but still no go. My question is, should the points on this ignitor be open or closed? Mine are closed. Sure would likes some words of wisdom from the group. Thank you in advance. Curt Andree