From blcksmth at wcnet.org  Sun Mar  1 13:45:05 2015
From: blcksmth at wcnet.org (Bob)
Date: Sun, 01 Mar 2015 16:45:05 -0500
Subject: [SEL] Test
In-Reply-To: <3BFF6223-181B-4C25-B4AF-03B09CD014B9@me.com>
References: <3BFF6223-181B-4C25-B4AF-03B09CD014B9@me.com>
Message-ID: <54F38861.8080509@wcnet.org>

     Nothing from the group for 2 days - just checking.

Bob Willman
The Eagle's Anvil
Bowling Green, Ohio
WB8NQW

We must reject the idea that every time a law's broken, society
is guilty rather than the lawbreaker. It is time to restore the
American precept that each individual is accountable for his actions.

Ronald Reagan



From ozengine at iinet.net.au  Sun Mar  1 14:16:26 2015
From: ozengine at iinet.net.au (Kerry)
Date: Mon, 02 Mar 2015 09:16:26 +1100
Subject: [SEL] Test
In-Reply-To: <54F38861.8080509@wcnet.org>
References: <3BFF6223-181B-4C25-B4AF-03B09CD014B9@me.com>
	<54F38861.8080509@wcnet.org>
Message-ID: <54F38FBA.6040102@iinet.net.au>

Got it down under in Oz
Kerry

On 2/03/2015 8:45 AM, Bob wrote:
>       Nothing from the group for 2 days - just checking.
>
> Bob Willman
> The Eagle's Anvil
> Bowling Green, Ohio
> WB8NQW
>
>

-- 
Kerry Morris
Tangye Engine Registrar
0400421133
Web Page.   www.oldengine.org/members/kmorris/



From rustaholic777 at yahoo.com  Sun Mar  1 18:52:22 2015
From: rustaholic777 at yahoo.com (Alan)
Date: Mon, 2 Mar 2015 02:52:22 +0000 (UTC)
Subject: [SEL] Test
In-Reply-To: <54F38861.8080509@wcnet.org>
References: <54F38861.8080509@wcnet.org>
Message-ID: <444112955.1195871.1425264742370.JavaMail.yahoo@mail.yahoo.com>

Yes Bob this list sure is slow compared to the 100 emails at least per day it was getting when I joined.Alan in Michigan
      From: Bob <blcksmth at wcnet.org>
 To: The SEL email discussion list <sel at lists.stationary-engine.com> 
 Sent: Sunday, March 1, 2015 4:45 PM
 Subject: [SEL] Test
   
? ? Nothing from the group for 2 days - just checking.

Bob Willman
The Eagle's Anvil
Bowling Green, Ohio
WB8NQW

We must reject the idea that every time a law's broken, society
is guilty rather than the lawbreaker. It is time to restore the
American precept that each individual is accountable for his actions.

Ronald Reagan



_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel


  

From plowe at exemail.com.au  Mon Mar  2 00:24:34 2015
From: plowe at exemail.com.au (Peter Lowe)
Date: Mon, 2 Mar 2015 19:24:34 +1100
Subject: [SEL] Aussie members in Melbourne
Message-ID: <CB739B5901A847679ABB145712040588@PeterPC>

Hi guys
A chap from the south east suburbs of Melbourne has just acquired a Sunshine 'Sundial' type A 2hp and is looking for a club or engine guy that can show his a thing or two.
He is 21 so we might have younger beginner to the hobby.
If anyone can help come back to me and I will put you in contact with him.
Regards
Peter Lowe
R&V Engine Registrar
http://www.oldengine.org/members/plowe/rv-engines/rvpage.htm

From patrick.livingstone at gmail.com  Wed Mar  4 19:01:58 2015
From: patrick.livingstone at gmail.com (Patrick Livingstone)
Date: Thu, 05 Mar 2015 14:01:58 +1100
Subject: [SEL] Festival of steam
Message-ID: <D11E1256.7699%patrick.livingstone@gmail.com>

A few pics of the Thirlmere Festival of Steam held last weekend. The feature
was the former New South Wales Government Railways AD60 class Garratt which
had been returned to steam after 20 years asleep:
http://www.oldengine.org/members/pml/tfos2015/index.htm

Patrick

Patrick M Livingstone
0418 692013
Earlwood NSW
http://www.oldengine.org/members/pml/Index.html





From paul at plwaugh.com  Wed Mar 11 09:52:29 2015
From: paul at plwaugh.com (Paul Waugh)
Date: Wed, 11 Mar 2015 12:52:29 -0400
Subject: [SEL] running on a battery
Message-ID: <000a01d05c1b$c378a340$4a69e9c0$@plwaugh.com>

Been a long time since I was around SEL people.  I have a JD  E that I give
up having a hot mag on it. I have a coil and 12V battery.  I feel the coil
is a high impedance coil (6 inch long and 1+ inch in diameter). What I am
looking for is help on how to hook this up.  Where does the positive go? To
the inside or outside lug?? And the from the remaining lug to the points??
Does the negative go straight to the engine frame??

 

I am sure this is so simple for most of you, but not for this old fart. If
younger I would try different things until I figured it out, but today
cranking that much is not an option.  Thanks for any help I get.

Paul Waugh

 



From christison at coastalnet.com  Wed Mar 11 10:18:48 2015
From: christison at coastalnet.com (Ken Christison)
Date: Wed, 11 Mar 2015 13:18:48 -0400
Subject: [SEL] running on a battery
In-Reply-To: <000a01d05c1b$c378a340$4a69e9c0$@plwaugh.com>
References: <000a01d05c1b$c378a340$4a69e9c0$@plwaugh.com>
Message-ID: <550078F8.7090206@coastalnet.com>

Check out Harry's page on this subject:
http://www.old-engine.com/maglco.htm

Take care.

Ken

On 3/11/2015 12:52 PM, Paul Waugh wrote:
> Been a long time since I was around SEL people.  I have a JD  E that I give
> up having a hot mag on it. I have a coil and 12V battery.  I feel the coil
> is a high impedance coil (6 inch long and 1+ inch in diameter). What I am
> looking for is help on how to hook this up.  Where does the positive go? To
> the inside or outside lug?? And the from the remaining lug to the points??
> Does the negative go straight to the engine frame??
>
>   
>
> I am sure this is so simple for most of you, but not for this old fart. If
> younger I would try different things until I figured it out, but today
> cranking that much is not an option.  Thanks for any help I get.
>
> Paul Waugh
>
>   
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>



From paul at plwaugh.com  Wed Mar 11 10:42:47 2015
From: paul at plwaugh.com (Paul Waugh)
Date: Wed, 11 Mar 2015 13:42:47 -0400
Subject: [SEL] running on a battery
In-Reply-To: <550078F8.7090206@coastalnet.com>
References: <000a01d05c1b$c378a340$4a69e9c0$@plwaugh.com>
	<550078F8.7090206@coastalnet.com>
Message-ID: <001501d05c22$ca4753e0$5ed5fba0$@plwaugh.com>

Ken
I had totally forgot about Harry's page. Guess that is what old age can do.
Thanks for making it simple.
Paul


-----Original Message-----
From: sel-bounces at lists.stationary-engine.com
[mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of Ken Christison
Sent: Wednesday, March 11, 2015 1:19 PM
To: The SEL email discussion list
Subject: Re: [SEL] running on a battery

Check out Harry's page on this subject:
http://www.old-engine.com/maglco.htm

Take care.

Ken

On 3/11/2015 12:52 PM, Paul Waugh wrote:
> Been a long time since I was around SEL people.  I have a JD  E that I 
> give up having a hot mag on it. I have a coil and 12V battery.  I feel 
> the coil is a high impedance coil (6 inch long and 1+ inch in 
> diameter). What I am looking for is help on how to hook this up.  
> Where does the positive go? To the inside or outside lug?? And the from
the remaining lug to the points??
> Does the negative go straight to the engine frame??
>
>   
>
> I am sure this is so simple for most of you, but not for this old 
> fart. If younger I would try different things until I figured it out, 
> but today cranking that much is not an option.  Thanks for any help I get.
>
> Paul Waugh
>
>   
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>

_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel




From 1oldengin at gmail.com  Thu Mar 12 17:56:05 2015
From: 1oldengin at gmail.com (Leroy Clark)
Date: Thu, 12 Mar 2015 20:56:05 -0400
Subject: [SEL] Maytag washer
In-Reply-To: <CA+B8urQ82iGaiMPEB8MAQMxfMH0pnO+U0_T9X+QVS1e26prsEQ@mail.gmail.com>
References: <CA+B8urQ82iGaiMPEB8MAQMxfMH0pnO+U0_T9X+QVS1e26prsEQ@mail.gmail.com>
Message-ID: <CA+B8urQ6RBV4b9WeSYr1b-DXLrfmDeMbmMAOto0k1BTv2Td_eA@mail.gmail.com>

I am looking for a Maytag washer. I would hope it to be the aluminum style
and does not need a motor. Thanks Leroy


From rd.frost at yahoo.com  Fri Mar 13 04:05:39 2015
From: rd.frost at yahoo.com (Ron Frost)
Date: Fri, 13 Mar 2015 11:05:39 +0000 (UTC)
Subject: [SEL] Maytag washer
In-Reply-To: <CA+B8urQ6RBV4b9WeSYr1b-DXLrfmDeMbmMAOto0k1BTv2Td_eA@mail.gmail.com>
References: <CA+B8urQ6RBV4b9WeSYr1b-DXLrfmDeMbmMAOto0k1BTv2Td_eA@mail.gmail.com>
Message-ID: <1567049247.377788.1426244739729.JavaMail.yahoo@mail.yahoo.com>

I got one and it's a square tub aluminum.I think just what your looking for. It's in Kersey, PA. How about $50.00 . Will take pictures of you are interested. It's complete even with electric motor. 
??Ron Perma Frost ?

 ? ? 

     On Thursday, March 12, 2015 9:06 PM, Leroy Clark <1oldengin at gmail.com> wrote:
   

 I am looking for a Maytag washer. I would hope it to be the aluminum style
and does not need a motor. Thanks Leroy
_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel


   

From rfinksr at verizon.net  Fri Mar 13 06:32:34 2015
From: rfinksr at verizon.net (Richard Fink Sr)
Date: Fri, 13 Mar 2015 09:32:34 -0400
Subject: [SEL] Maytag washer
In-Reply-To: <1567049247.377788.1426244739729.JavaMail.yahoo@mail.yahoo.com>
References: <CA+B8urQ6RBV4b9WeSYr1b-DXLrfmDeMbmMAOto0k1BTv2Td_eA@mail.gmail.com>
	<1567049247.377788.1426244739729.JavaMail.yahoo@mail.yahoo.com>
Message-ID: <5502E6F2.7070504@verizon.net>

Ron what color is the tub on your washer, i ask because i had one i sold 
in my auction last fall that was green. Auctioneer said re never saw one 
that color. IT was not repainted that we could find.
R Fink
PA

On 3/13/2015 7:05 AM, Ron Frost wrote:
> I got one and it's a square tub aluminum.I think just what your looking for. It's in Kersey, PA. How about $50.00 . Will take pictures of you are interested. It's complete even with electric motor.
>    Ron Perma Frost
>
>       
>
>       On Thursday, March 12, 2015 9:06 PM, Leroy Clark <1oldengin at gmail.com> wrote:
>     
>
>   I am looking for a Maytag washer. I would hope it to be the aluminum style
> and does not need a motor. Thanks Leroy
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>
>
>     
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel


---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com



From rd.frost at yahoo.com  Fri Mar 13 07:19:04 2015
From: rd.frost at yahoo.com (Ron Frost)
Date: Fri, 13 Mar 2015 14:19:04 +0000 (UTC)
Subject: [SEL] Maytag washer
In-Reply-To: <5502E6F2.7070504@verizon.net>
References: <5502E6F2.7070504@verizon.net>
Message-ID: <948821916.452894.1426256344201.JavaMail.yahoo@mail.yahoo.com>

I'm going to have to call it a medium gray with a touch of brown or yellow in it. I'm sure it's original?as a big share of the paint is gone and it's bare metal underneath. ?My Mom had one just like it back in the 30's and 40's and it was the off gray color.?Ron Perma Frost ?

 ? ? 

     On Friday, March 13, 2015 9:32 AM, Richard Fink Sr <rfinksr at verizon.net> wrote:
   

 Ron what color is the tub on your washer, i ask because i had one i sold 
in my auction last fall that was green. Auctioneer said re never saw one 
that color. IT was not repainted that we could find.
R Fink
PA

On 3/13/2015 7:05 AM, Ron Frost wrote:
> I got one and it's a square tub aluminum.I think just what your looking for. It's in Kersey, PA. How about $50.00 . Will take pictures of you are interested. It's complete even with electric motor.
>? ? Ron Perma Frost
>
>? ? ? 
>
>? ? ? On Thursday, March 12, 2015 9:06 PM, Leroy Clark <1oldengin at gmail.com> wrote:
>? ? 
>
>? I am looking for a Maytag washer. I would hope it to be the aluminum style
> and does not need a motor. Thanks Leroy
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>
>
>? ? 
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel


---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com

_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel


   

From kkinney at herculesengines.com  Fri Mar 13 09:01:08 2015
From: kkinney at herculesengines.com (kkinney at herculesengines.com)
Date: Fri, 13 Mar 2015 11:01:08 -0500
Subject: [SEL] Maytag washer
In-Reply-To: <948821916.452894.1426256344201.JavaMail.yahoo@mail.yahoo.com>
References: <5502E6F2.7070504@verizon.net>
	<948821916.452894.1426256344201.JavaMail.yahoo@mail.yahoo.com>
Message-ID: <4BB7A7E8-E225-4319-A5E4-C2E87FC2F383@herculesengines.com>

Once we find a washer for Leroy I?d like to find one too.  We have one that we liked to take to shows but it had an unfortunate fall from a shelf and is in pieces now.  Same as Leroy, no engine needed just a good old square tub washer.
Thanks.
Keith


On Mar 13, 2015, at 9:19 AM, Ron Frost <rd.frost at yahoo.com> wrote:

> I'm going to have to call it a medium gray with a touch of brown or yellow in it. I'm sure it's original as a big share of the paint is gone and it's bare metal underneath.  My Mom had one just like it back in the 30's and 40's and it was the off gray color. Ron Perma Frost  
> 
>     
> 
>     On Friday, March 13, 2015 9:32 AM, Richard Fink Sr <rfinksr at verizon.net> wrote:
> 
> 
> Ron what color is the tub on your washer, i ask because i had one i sold 
> in my auction last fall that was green. Auctioneer said re never saw one 
> that color. IT was not repainted that we could find.
> R Fink
> PA
> 
> On 3/13/2015 7:05 AM, Ron Frost wrote:
>> I got one and it's a square tub aluminum.I think just what your looking for. It's in Kersey, PA. How about $50.00 . Will take pictures of you are interested. It's complete even with electric motor.
>>     Ron Perma Frost
>> 
>>       
>> 
>>       On Thursday, March 12, 2015 9:06 PM, Leroy Clark <1oldengin at gmail.com> wrote:
>>     
>> 
>>   I am looking for a Maytag washer. I would hope it to be the aluminum style
>> and does not need a motor. Thanks Leroy
>> _______________________________________________
>> SEL mailing list
>> SEL at lists.stationary-engine.com
>> http://www.stationary-engine.com/mailman/listinfo/sel
>> 
>> 
>>     
>> _______________________________________________
>> SEL mailing list
>> SEL at lists.stationary-engine.com
>> http://www.stationary-engine.com/mailman/listinfo/sel
> 
> 
> ---
> This email has been checked for viruses by Avast antivirus software.
> http://www.avast.com
> 
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
> 
> 
> 
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel




From bigtime64 at hotmail.com  Fri Mar 13 10:05:15 2015
From: bigtime64 at hotmail.com (Ed Herreid)
Date: Fri, 13 Mar 2015 17:05:15 +0000
Subject: [SEL] Maytag washer
In-Reply-To: <CA+B8urQ6RBV4b9WeSYr1b-DXLrfmDeMbmMAOto0k1BTv2Td_eA@mail.gmail.com>
References: <CA+B8urQ82iGaiMPEB8MAQMxfMH0pnO+U0_T9X+QVS1e26prsEQ@mail.gmail.com>,
	<CA+B8urQ6RBV4b9WeSYr1b-DXLrfmDeMbmMAOto0k1BTv2Td_eA@mail.gmail.com>
Message-ID: <SNT152-W46321503A2918E6E713EFAB4070@phx.gbl>

Leroy,
 
I might have what you need.  
Contact me off list.  
 
bigtime64 at hotmail.com
 
Ed Herreid
 

 
> Date: Thu, 12 Mar 2015 20:56:05 -0400
> From: 1oldengin at gmail.com
> To: sel at lists.stationary-engine.com
> Subject: [SEL] Maytag washer
> 
> I am looking for a Maytag washer. I would hope it to be the aluminum style
> and does not need a motor. Thanks Leroy
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
 		 	   		  

From frappi at wcoil.com  Fri Mar 13 10:55:53 2015
From: frappi at wcoil.com (Mark Shulaw)
Date: Fri, 13 Mar 2015 13:55:53 -0400
Subject: [SEL] Maytag washer
In-Reply-To: <948821916.452894.1426256344201.JavaMail.yahoo@mail.yahoo.c
 om>
References: <5502E6F2.7070504@verizon.net>
	<948821916.452894.1426256344201.JavaMail.yahoo@mail.yahoo.com>
Message-ID: <20150313175635.80E6980F0@smtp.wcoil.com>

Richard,
I think it was the model 60 that came with an Apple Green Finish.
A grey washer that gives off a brown or greenish 
cast is displaying the contamination of the paint 
surface with oils and dirts. Maytags washer paint 
was just a plain old enamel and was highly 
susceptible to dirt and oil penetrating the 
paint. Some times you can bring out the original 
shade by finding a spot with decent paint and polishing on it. Mark

At 10:19 AM 3/13/2015, you wrote:
>I'm going to have to call it a medium gray with 
>a touch of brown or yellow in it. I'm sure it's 
>original? as a big share of the paint is gone 
>and it's bare metal underneath. ? My Mom had one 
>just like it back in the 30's and 40's and it 
>was the off gray color.? Ron Perma Frost 
>?  ?  ?       On Friday, March 13, 2015 9:32 AM, 
>Richard Fink Sr <rfinksr at verizon.net> 
>wrote:    Ron what color is the tub on your 
>washer, i ask because i had one i sold in my 
>auction last fall that was green. Auctioneer 
>said re never saw one that color. IT was not 
>repainted that we could find. R Fink PA On 
>3/13/2015 7:05 AM, Ron Frost wrote: > I got one 
>and it's a square tub aluminum.I think just what 
>your looking for. It's in Kersey, PA. How about 
>$50.00 . Will take pictures of you are 
>interested. It's complete even with electric 
>motor. >?  ?  Ron Perma 
>Frost > >?  ?  ?  > >?  ?  ?  On Thursday, March 
>12, 2015 9:06 PM, Leroy Clark 
><1oldengin at gmail.com> wrote: >?  ?  > >?  I am 
>looking for a Maytag washer. I would hope it to 
>be the aluminum style > and does not need a 
>motor. Thanks Leroy > 
>_______________________________________________ > 
>  SEL mailing list > 
>SEL at lists.stationary-engine.com > 
>http://www.stationary-engine.com/mailman/listinfo/sel  
> > > >?  ?  > 
>_______________________________________________ > 
>  SEL mailing list > 
>SEL at lists.stationary-engine.com > 
>http://www.stationary-engine.com/mailman/listinfo/sel 
>--- This email has been checked for viruses by 
>Avast antivirus software. http://www.avast.com 
>_______________________________________________ 
>SEL mailing list SEL at lists.stationary-engine.com 
>http://www.stationary-engine.com/mailman/listinfo/sel 
>_______________________________________________ 
>SEL mailing list SEL at lists.stationary-engine.com 
>http://www.stationary-engine.com/mailman/listinfo/sel


Mark Shulaw
454 County Road 33
Bluffton, OH. 45817
USA

Frappi at wcoil.com / 419.358.5206  Home
Hobby Collector and Dealer in John Deere
and Hercules Engines.
Maytag Multi-Motor Engine parts.
VISIT the Maytag Collectors Club at  www.Maytagclub.com
Where Is John Galt  


---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com




From rfinksr at verizon.net  Fri Mar 13 12:00:59 2015
From: rfinksr at verizon.net (Richard Fink Sr)
Date: Fri, 13 Mar 2015 15:00:59 -0400
Subject: [SEL] Maytag washer
In-Reply-To: <20150313175635.80E6980F0@smtp.wcoil.com>
References: <5502E6F2.7070504@verizon.net>
	<948821916.452894.1426256344201.JavaMail.yahoo@mail.yahoo.com>
	<20150313175635.80E6980F0@smtp.wcoil.com>
Message-ID: <550333EB.3080609@verizon.net>

Thank you all we had this one about 30 years give or take
R Fink
PA

On 3/13/2015 1:55 PM, Mark Shulaw wrote:
> Richard,
> I think it was the model 60 that came with an Apple Green Finish.
> A grey washer that gives off a brown or greenish
> cast is displaying the contamination of the paint
> surface with oils and dirts. Maytags washer paint
> was just a plain old enamel and was highly
> susceptible to dirt and oil penetrating the
> paint. Some times you can bring out the original
> shade by finding a spot with decent paint and polishing on it. Mark
>
> At 10:19 AM 3/13/2015, you wrote:
>> I'm going to have to call it a medium gray with
>> a touch of brown or yellow in it. I'm sure it's
>> original? as a big share of the paint is gone
>> and it's bare metal underneath. ? My Mom had one
>> just like it back in the 30's and 40's and it
>> was the off gray color.? Ron Perma Frost
>> ?  ?  ?       On Friday, March 13, 2015 9:32 AM,
>> Richard Fink Sr <rfinksr at verizon.net>
>> wrote:    Ron what color is the tub on your
>> washer, i ask because i had one i sold in my
>> auction last fall that was green. Auctioneer
>> said re never saw one that color. IT was not
>> repainted that we could find. R Fink PA On
>> 3/13/2015 7:05 AM, Ron Frost wrote: > I got one
>> and it's a square tub aluminum.I think just what
>> your looking for. It's in Kersey, PA. How about
>> $50.00 . Will take pictures of you are
>> interested. It's complete even with electric
>> motor. >?  ?  Ron Perma
>> Frost > >?  ?  ?  > >?  ?  ?  On Thursday, March
>> 12, 2015 9:06 PM, Leroy Clark
>> <1oldengin at gmail.com> wrote: >?  ?  > >?  I am
>> looking for a Maytag washer. I would hope it to
>> be the aluminum style > and does not need a
>> motor. Thanks Leroy >
>> _______________________________________________ >
>>   SEL mailing list >
>> SEL at lists.stationary-engine.com >
>> http://www.stationary-engine.com/mailman/listinfo/sel
>>>>> ?  ?  >
>> _______________________________________________ >
>>   SEL mailing list >
>> SEL at lists.stationary-engine.com >
>> http://www.stationary-engine.com/mailman/listinfo/sel
>> --- This email has been checked for viruses by
>> Avast antivirus software. http://www.avast.com
>> _______________________________________________
>> SEL mailing list SEL at lists.stationary-engine.com
>> http://www.stationary-engine.com/mailman/listinfo/sel
>> _______________________________________________
>> SEL mailing list SEL at lists.stationary-engine.com
>> http://www.stationary-engine.com/mailman/listinfo/sel
>
> Mark Shulaw
> 454 County Road 33
> Bluffton, OH. 45817
> USA
>
> Frappi at wcoil.com / 419.358.5206  Home
> Hobby Collector and Dealer in John Deere
> and Hercules Engines.
> Maytag Multi-Motor Engine parts.
> VISIT the Maytag Collectors Club at  www.Maytagclub.com
> Where Is John Galt
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> http://www.avast.com
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>


---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com



From rd.frost at yahoo.com  Fri Mar 13 13:10:55 2015
From: rd.frost at yahoo.com (Ron Frost)
Date: Fri, 13 Mar 2015 20:10:55 +0000 (UTC)
Subject: [SEL] Maytag washer
In-Reply-To: <550333EB.3080609@verizon.net>
References: <550333EB.3080609@verizon.net>
Message-ID: <1750207451.6175841.1426277455617.JavaMail.yahoo@mail.yahoo.com>

Well if Leroy doesn't take it your next in line for it. ??Ron Perma Frost ?

 ? ? 

     On Friday, March 13, 2015 3:06 PM, Richard Fink Sr <rfinksr at verizon.net> wrote:
   

 Thank you all we had this one about 30 years give or take
R Fink
PA

On 3/13/2015 1:55 PM, Mark Shulaw wrote:
> Richard,
> I think it was the model 60 that came with an Apple Green Finish.
> A grey washer that gives off a brown or greenish
> cast is displaying the contamination of the paint
> surface with oils and dirts. Maytags washer paint
> was just a plain old enamel and was highly
> susceptible to dirt and oil penetrating the
> paint. Some times you can bring out the original
> shade by finding a spot with decent paint and polishing on it. Mark
>
> At 10:19 AM 3/13/2015, you wrote:
>> I'm going to have to call it a medium gray with
>> a touch of brown or yellow in it. I'm sure it's
>> original? as a big share of the paint is gone
>> and it's bare metal underneath. ? My Mom had one
>> just like it back in the 30's and 40's and it
>> was the off gray color.? Ron Perma Frost
>> ?? ?? ?? ? ? On Friday, March 13, 2015 9:32 AM,
>> Richard Fink Sr <rfinksr at verizon.net>
>> wrote:? ? Ron what color is the tub on your
>> washer, i ask because i had one i sold in my
>> auction last fall that was green. Auctioneer
>> said re never saw one that color. IT was not
>> repainted that we could find. R Fink PA On
>> 3/13/2015 7:05 AM, Ron Frost wrote: > I got one
>> and it's a square tub aluminum.I think just what
>> your looking for. It's in Kersey, PA. How about
>> $50.00 . Will take pictures of you are
>> interested. It's complete even with electric
>> motor. >?? ?? Ron Perma
>> Frost > >?? ?? ?? > >?? ?? ?? On Thursday, March
>> 12, 2015 9:06 PM, Leroy Clark
>> <1oldengin at gmail.com> wrote: >?? ?? > >?? I am
>> looking for a Maytag washer. I would hope it to
>> be the aluminum style > and does not need a
>> motor. Thanks Leroy >
>> _______________________________________________ >
>>? SEL mailing list >
>> SEL at lists.stationary-engine.com >
>> http://www.stationary-engine.com/mailman/listinfo/sel
>>>>> ?? ?? >
>> _______________________________________________ >
>>? SEL mailing list >
>> SEL at lists.stationary-engine.com >
>> http://www.stationary-engine.com/mailman/listinfo/sel
>> --- This email has been checked for viruses by
>> Avast antivirus software. http://www.avast.com
>> _______________________________________________
>> SEL mailing list SEL at lists.stationary-engine.com
>> http://www.stationary-engine.com/mailman/listinfo/sel
>> _______________________________________________
>> SEL mailing list SEL at lists.stationary-engine.com
>> http://www.stationary-engine.com/mailman/listinfo/sel
>
> Mark Shulaw
> 454 County Road 33
> Bluffton, OH. 45817
> USA
>
> Frappi at wcoil.com / 419.358.5206? Home
> Hobby Collector and Dealer in John Deere
> and Hercules Engines.
> Maytag Multi-Motor Engine parts.
> VISIT the Maytag Collectors Club at? www.Maytagclub.com
> Where Is John Galt
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> http://www.avast.com
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>


---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com

_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel

   

From rdhaskell at juno.com  Fri Mar 13 14:26:09 2015
From: rdhaskell at juno.com (rdhaskell at juno.com)
Date: Fri, 13 Mar 2015 14:26:09 -0700
Subject: [SEL] 8 cycle Aermotor
Message-ID: <AABLSGXUTA7LRR4A@smtpout02.vgs.untd.com>

Hi all.
Could someone please measure the spring on the governor in the flywheel
for an 8 cycle Aermotor?  I suspect mine is wrong, the wire size is .108"
with 4 coils, and a free length of .770"
Thanks.

Ron Haskell
rdhaskell at juno.com
Riverside, California USA
http://picasaweb.google.com/RonHaskell



From rotigel at me.com  Sat Mar 14 13:53:55 2015
From: rotigel at me.com (Dave Rotigel)
Date: Sat, 14 Mar 2015 16:53:55 -0400
Subject: [SEL] Glenn Wilson???????
Message-ID: <3E19DB39-C85C-464E-9C86-9AFD28082CEF@me.com>

Does anyone have contact with Glenn Wilson? I got a phone call today asking me for his contact info. from someone (in PA) who wants information on an engine Glenn either does, or did, own.
	Thanks for any help, Dave




From wilson at stny.rr.com  Sat Mar 14 14:40:27 2015
From: wilson at stny.rr.com (Glenn Wilson)
Date: Sat, 14 Mar 2015 17:40:27 -0400
Subject: [SEL] Glenn Wilson???????
In-Reply-To: <3E19DB39-C85C-464E-9C86-9AFD28082CEF@me.com>
References: <3E19DB39-C85C-464E-9C86-9AFD28082CEF@me.com>
Message-ID: <C50484E6-0EAA-4570-B853-9C2A2AE7A9F5@stny.rr.com>

I'm here Dave! I've been lurking in the background.   

Glenn Wilson
Endicott, NY
www.WilsonsWarbler.com

On Mar 14, 2015, at 4:53 PM, Dave Rotigel <rotigel at me.com> wrote:

Does anyone have contact with Glenn Wilson? I got a phone call today asking me for his contact info. from someone (in PA) who wants information on an engine Glenn either does, or did, own.
   Thanks for any help, Dave


_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel



From ozengine at yahoo.com.au  Sun Mar 15 16:53:52 2015
From: ozengine at yahoo.com.au (ozengine at yahoo.com.au)
Date: Sun, 15 Mar 2015 16:53:52 -0700
Subject: [SEL] Reggie everywhere
Message-ID: <1426463632.89525.YahooMailAndroidMobile@web121203.mail.ne1.yahoo.com>

Got back last week from 2 weeks in Tasmania. This was to take in the National and Sheffield Steamfest rallies and a round-Tas holiday with the gang. To see the rollers and locos drive up and park outside the pub for the dinner was spectacular, unique in Oz I would think. We had a great time there, it's really beautiful. Amongst the many things we saw, was the Zeehan museum (in Zeehan, of course). This was good, real good, but the highlight of that visit was meeting Reggie's daughter (Carol?) Who works there, part time!

Things about Reg always turn up unexpectedly!? She was very nice, and helpful answering historical questions, said he was 80 this year, still going strong, Marg as well. When I said we was here for the Rally, she added that her Dad builds model engines, that was notable, but when she said he lives in Newc, well that gave it away! I remember when Reg first joined the list, he was the age that I am now...

Graham in Oz



From rotigel at me.com  Sun Mar 15 17:38:34 2015
From: rotigel at me.com (Dave Rotigel)
Date: Sun, 15 Mar 2015 20:38:34 -0400
Subject: [SEL] Reggie everywhere
In-Reply-To: <1426463632.89525.YahooMailAndroidMobile@web121203.mail.ne1.yahoo.com>
References: <1426463632.89525.YahooMailAndroidMobile@web121203.mail.ne1.yahoo.com>
Message-ID: <3285EAE9-2085-4F82-ABC4-706BC18CC289@me.com>

Hi Grahn, 
	I was under the impression that Reg was a bit younger than that and that Marg was LOTS younger than that. At least she looks that way in the pictures I've seen. I've always been under the impression that Marg just kinda liked OLDER bike riders and that's why she "fell" for Reg.
	Dave
PS, In any event, Reg is ONE LUCKY SOB!

On Mar 15, 2015, at 7:53 PM, ozengine at yahoo.com.au wrote:

> Got back last week from 2 weeks in Tasmania. This was to take in the National and Sheffield Steamfest rallies and a round-Tas holiday with the gang. To see the rollers and locos drive up and park outside the pub for the dinner was spectacular, unique in Oz I would think. We had a great time there, it's really beautiful. Amongst the many things we saw, was the Zeehan museum (in Zeehan, of course). This was good, real good, but the highlight of that visit was meeting Reggie's daughter (Carol?) Who works there, part time!
> 
> Things about Reg always turn up unexpectedly!  She was very nice, and helpful answering historical questions, said he was 80 this year, still going strong, Marg as well. When I said we was here for the Rally, she added that her Dad builds model engines, that was notable, but when she said he lives in Newc, well that gave it away! I remember when Reg first joined the list, he was the age that I am now...
> 
> Graham in Oz
> 
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel




From plowe at exemail.com.au  Wed Mar 18 03:40:39 2015
From: plowe at exemail.com.au (Peter Lowe)
Date: Wed, 18 Mar 2015 21:40:39 +1100
Subject: [SEL] Cezeta motorcycle info wanted
Message-ID: <2D4AA2B21E6545B9B96DADBFEBA03172@PeterPC>

Hi world wide group,
Does anyone know where I can source a starter / generator unit for a Cezeta 501 61 100 motor scooter and pictures of same. The one unit starts the bike and then charges. This is probably more aimed at UK members.

Regards
Peter Lowe
R&V Engine Registrar
http://www.oldengine.org/members/plowe/rv-engines/rvpage.htm

From wilson at stny.rr.com  Wed Mar 18 11:50:04 2015
From: wilson at stny.rr.com (Glenn Wilson)
Date: Wed, 18 Mar 2015 14:50:04 -0400
Subject: [SEL] Ramp Atifreeze
Message-ID: <C4236B6D-BA1D-4221-8914-69EF034DDB9C@stny.rr.com>

I still have the case of Ramp Atufreeze. I meant to have it shipped to Michigan but my friend took off without it. 
I still have it. I still want to get rid of it. If you'd like a quart email me your name and shipping address. I'll send one out free. If, after receiving it, you feel like paying me back shipping, I'll accept it. 

At the risk of being scolded (like I was one day for "walking all over" someone's engine) I will add a small picture here. 
-------------- next part --------------

Thank you
 
-------------- next part --------------

Glenn Wilson
Endicott, NY
www.WilsonsWarbler.com

From wilson at stny.rr.com  Wed Mar 18 12:16:21 2015
From: wilson at stny.rr.com (Glenn Wilson)
Date: Wed, 18 Mar 2015 15:16:21 -0400
Subject: [SEL] Ramp Atifreeze
In-Reply-To: <C4236B6D-BA1D-4221-8914-69EF034DDB9C@stny.rr.com>
References: <C4236B6D-BA1D-4221-8914-69EF034DDB9C@stny.rr.com>
Message-ID: <C048F8C0-9A1D-47A9-AAFD-4FA1DD3C8C66@stny.rr.com>

Ok. It's obvious the picture didn't make it through. I'll gladly send anyone interested a picture. 

Glenn Wilson
Endicott, NY
www.WilsonsWarbler.com

On Mar 18, 2015, at 2:50 PM, Glenn Wilson <wilson at stny.rr.com> wrote:

I still have the case of Ramp Atufreeze. I meant to have it shipped to Michigan but my friend took off without it. 
I still have it. I still want to get rid of it. If you'd like a quart email me your name and shipping address. I'll send one out free. If, after receiving it, you feel like paying me back shipping, I'll accept it. 

At the risk of being scolded (like I was one day for "walking all over" someone's engine) I will add a small picture here. 

Thank you


Glenn Wilson
Endicott, NY
www.WilsonsWarbler.com
_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel



From fero_ah at city-net.com  Thu Mar 19 15:11:29 2015
From: fero_ah at city-net.com (Arnie Fero)
Date: Thu, 19 Mar 2015 18:11:29 -0400 (EDT)
Subject: [SEL] Coolspring Power Museum 2015 Flame Ignition Expo
Message-ID: <c2e0c1115e9d664ae7b441d8752e1d47.squirrel@mail.realprodata.com>

>From Wayne Grenning on Smokstak...

This will be a very significant event. I just totaled the engines on my
list that I am aware of that are "likely to attend". Including the ones
already at the museum, there will be 36 flame ignition engines on display.
This years event will have 3 times more flame ignition engines than were
present at the infamous 1995 Flame Ignition Expo! I would expect another
30 or so flame ignition models to be on display as well. If anyone ever
needed an excuse to visit the Coolspring Museum, this would be it!





From blcksmth at wcnet.org  Sun Mar  1 13:45:05 2015
From: blcksmth at wcnet.org (Bob)
Date: Sun, 01 Mar 2015 16:45:05 -0500
Subject: [SEL] Test
In-Reply-To: <3BFF6223-181B-4C25-B4AF-03B09CD014B9@me.com>
References: <3BFF6223-181B-4C25-B4AF-03B09CD014B9@me.com>
Message-ID: <54F38861.8080509@wcnet.org>

     Nothing from the group for 2 days - just checking.

Bob Willman
The Eagle's Anvil
Bowling Green, Ohio
WB8NQW

We must reject the idea that every time a law's broken, society
is guilty rather than the lawbreaker. It is time to restore the
American precept that each individual is accountable for his actions.

Ronald Reagan



From ozengine at iinet.net.au  Sun Mar  1 14:16:26 2015
From: ozengine at iinet.net.au (Kerry)
Date: Mon, 02 Mar 2015 09:16:26 +1100
Subject: [SEL] Test
In-Reply-To: <54F38861.8080509@wcnet.org>
References: <3BFF6223-181B-4C25-B4AF-03B09CD014B9@me.com>
	<54F38861.8080509@wcnet.org>
Message-ID: <54F38FBA.6040102@iinet.net.au>

Got it down under in Oz
Kerry

On 2/03/2015 8:45 AM, Bob wrote:
>       Nothing from the group for 2 days - just checking.
>
> Bob Willman
> The Eagle's Anvil
> Bowling Green, Ohio
> WB8NQW
>
>

-- 
Kerry Morris
Tangye Engine Registrar
0400421133
Web Page.   www.oldengine.org/members/kmorris/



From rustaholic777 at yahoo.com  Sun Mar  1 18:52:22 2015
From: rustaholic777 at yahoo.com (Alan)
Date: Mon, 2 Mar 2015 02:52:22 +0000 (UTC)
Subject: [SEL] Test
In-Reply-To: <54F38861.8080509@wcnet.org>
References: <54F38861.8080509@wcnet.org>
Message-ID: <444112955.1195871.1425264742370.JavaMail.yahoo@mail.yahoo.com>

Yes Bob this list sure is slow compared to the 100 emails at least per day it was getting when I joined.Alan in Michigan
      From: Bob <blcksmth at wcnet.org>
 To: The SEL email discussion list <sel at lists.stationary-engine.com> 
 Sent: Sunday, March 1, 2015 4:45 PM
 Subject: [SEL] Test
   
? ? Nothing from the group for 2 days - just checking.

Bob Willman
The Eagle's Anvil
Bowling Green, Ohio
WB8NQW

We must reject the idea that every time a law's broken, society
is guilty rather than the lawbreaker. It is time to restore the
American precept that each individual is accountable for his actions.

Ronald Reagan



_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel


  

From plowe at exemail.com.au  Mon Mar  2 00:24:34 2015
From: plowe at exemail.com.au (Peter Lowe)
Date: Mon, 2 Mar 2015 19:24:34 +1100
Subject: [SEL] Aussie members in Melbourne
Message-ID: <CB739B5901A847679ABB145712040588@PeterPC>

Hi guys
A chap from the south east suburbs of Melbourne has just acquired a Sunshine 'Sundial' type A 2hp and is looking for a club or engine guy that can show his a thing or two.
He is 21 so we might have younger beginner to the hobby.
If anyone can help come back to me and I will put you in contact with him.
Regards
Peter Lowe
R&V Engine Registrar
http://www.oldengine.org/members/plowe/rv-engines/rvpage.htm

From patrick.livingstone at gmail.com  Wed Mar  4 19:01:58 2015
From: patrick.livingstone at gmail.com (Patrick Livingstone)
Date: Thu, 05 Mar 2015 14:01:58 +1100
Subject: [SEL] Festival of steam
Message-ID: <D11E1256.7699%patrick.livingstone@gmail.com>

A few pics of the Thirlmere Festival of Steam held last weekend. The feature
was the former New South Wales Government Railways AD60 class Garratt which
had been returned to steam after 20 years asleep:
http://www.oldengine.org/members/pml/tfos2015/index.htm

Patrick

Patrick M Livingstone
0418 692013
Earlwood NSW
http://www.oldengine.org/members/pml/Index.html





From paul at plwaugh.com  Wed Mar 11 09:52:29 2015
From: paul at plwaugh.com (Paul Waugh)
Date: Wed, 11 Mar 2015 12:52:29 -0400
Subject: [SEL] running on a battery
Message-ID: <000a01d05c1b$c378a340$4a69e9c0$@plwaugh.com>

Been a long time since I was around SEL people.  I have a JD  E that I give
up having a hot mag on it. I have a coil and 12V battery.  I feel the coil
is a high impedance coil (6 inch long and 1+ inch in diameter). What I am
looking for is help on how to hook this up.  Where does the positive go? To
the inside or outside lug?? And the from the remaining lug to the points??
Does the negative go straight to the engine frame??

 

I am sure this is so simple for most of you, but not for this old fart. If
younger I would try different things until I figured it out, but today
cranking that much is not an option.  Thanks for any help I get.

Paul Waugh

 



From christison at coastalnet.com  Wed Mar 11 10:18:48 2015
From: christison at coastalnet.com (Ken Christison)
Date: Wed, 11 Mar 2015 13:18:48 -0400
Subject: [SEL] running on a battery
In-Reply-To: <000a01d05c1b$c378a340$4a69e9c0$@plwaugh.com>
References: <000a01d05c1b$c378a340$4a69e9c0$@plwaugh.com>
Message-ID: <550078F8.7090206@coastalnet.com>

Check out Harry's page on this subject:
http://www.old-engine.com/maglco.htm

Take care.

Ken

On 3/11/2015 12:52 PM, Paul Waugh wrote:
> Been a long time since I was around SEL people.  I have a JD  E that I give
> up having a hot mag on it. I have a coil and 12V battery.  I feel the coil
> is a high impedance coil (6 inch long and 1+ inch in diameter). What I am
> looking for is help on how to hook this up.  Where does the positive go? To
> the inside or outside lug?? And the from the remaining lug to the points??
> Does the negative go straight to the engine frame??
>
>   
>
> I am sure this is so simple for most of you, but not for this old fart. If
> younger I would try different things until I figured it out, but today
> cranking that much is not an option.  Thanks for any help I get.
>
> Paul Waugh
>
>   
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>



From paul at plwaugh.com  Wed Mar 11 10:42:47 2015
From: paul at plwaugh.com (Paul Waugh)
Date: Wed, 11 Mar 2015 13:42:47 -0400
Subject: [SEL] running on a battery
In-Reply-To: <550078F8.7090206@coastalnet.com>
References: <000a01d05c1b$c378a340$4a69e9c0$@plwaugh.com>
	<550078F8.7090206@coastalnet.com>
Message-ID: <001501d05c22$ca4753e0$5ed5fba0$@plwaugh.com>

Ken
I had totally forgot about Harry's page. Guess that is what old age can do.
Thanks for making it simple.
Paul


-----Original Message-----
From: sel-bounces at lists.stationary-engine.com
[mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of Ken Christison
Sent: Wednesday, March 11, 2015 1:19 PM
To: The SEL email discussion list
Subject: Re: [SEL] running on a battery

Check out Harry's page on this subject:
http://www.old-engine.com/maglco.htm

Take care.

Ken

On 3/11/2015 12:52 PM, Paul Waugh wrote:
> Been a long time since I was around SEL people.  I have a JD  E that I 
> give up having a hot mag on it. I have a coil and 12V battery.  I feel 
> the coil is a high impedance coil (6 inch long and 1+ inch in 
> diameter). What I am looking for is help on how to hook this up.  
> Where does the positive go? To the inside or outside lug?? And the from
the remaining lug to the points??
> Does the negative go straight to the engine frame??
>
>   
>
> I am sure this is so simple for most of you, but not for this old 
> fart. If younger I would try different things until I figured it out, 
> but today cranking that much is not an option.  Thanks for any help I get.
>
> Paul Waugh
>
>   
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>

_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel




From 1oldengin at gmail.com  Thu Mar 12 17:56:05 2015
From: 1oldengin at gmail.com (Leroy Clark)
Date: Thu, 12 Mar 2015 20:56:05 -0400
Subject: [SEL] Maytag washer
In-Reply-To: <CA+B8urQ82iGaiMPEB8MAQMxfMH0pnO+U0_T9X+QVS1e26prsEQ@mail.gmail.com>
References: <CA+B8urQ82iGaiMPEB8MAQMxfMH0pnO+U0_T9X+QVS1e26prsEQ@mail.gmail.com>
Message-ID: <CA+B8urQ6RBV4b9WeSYr1b-DXLrfmDeMbmMAOto0k1BTv2Td_eA@mail.gmail.com>

I am looking for a Maytag washer. I would hope it to be the aluminum style
and does not need a motor. Thanks Leroy


From rd.frost at yahoo.com  Fri Mar 13 04:05:39 2015
From: rd.frost at yahoo.com (Ron Frost)
Date: Fri, 13 Mar 2015 11:05:39 +0000 (UTC)
Subject: [SEL] Maytag washer
In-Reply-To: <CA+B8urQ6RBV4b9WeSYr1b-DXLrfmDeMbmMAOto0k1BTv2Td_eA@mail.gmail.com>
References: <CA+B8urQ6RBV4b9WeSYr1b-DXLrfmDeMbmMAOto0k1BTv2Td_eA@mail.gmail.com>
Message-ID: <1567049247.377788.1426244739729.JavaMail.yahoo@mail.yahoo.com>

I got one and it's a square tub aluminum.I think just what your looking for. It's in Kersey, PA. How about $50.00 . Will take pictures of you are interested. It's complete even with electric motor. 
??Ron Perma Frost ?

 ? ? 

     On Thursday, March 12, 2015 9:06 PM, Leroy Clark <1oldengin at gmail.com> wrote:
   

 I am looking for a Maytag washer. I would hope it to be the aluminum style
and does not need a motor. Thanks Leroy
_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel


   

From rfinksr at verizon.net  Fri Mar 13 06:32:34 2015
From: rfinksr at verizon.net (Richard Fink Sr)
Date: Fri, 13 Mar 2015 09:32:34 -0400
Subject: [SEL] Maytag washer
In-Reply-To: <1567049247.377788.1426244739729.JavaMail.yahoo@mail.yahoo.com>
References: <CA+B8urQ6RBV4b9WeSYr1b-DXLrfmDeMbmMAOto0k1BTv2Td_eA@mail.gmail.com>
	<1567049247.377788.1426244739729.JavaMail.yahoo@mail.yahoo.com>
Message-ID: <5502E6F2.7070504@verizon.net>

Ron what color is the tub on your washer, i ask because i had one i sold 
in my auction last fall that was green. Auctioneer said re never saw one 
that color. IT was not repainted that we could find.
R Fink
PA

On 3/13/2015 7:05 AM, Ron Frost wrote:
> I got one and it's a square tub aluminum.I think just what your looking for. It's in Kersey, PA. How about $50.00 . Will take pictures of you are interested. It's complete even with electric motor.
>    Ron Perma Frost
>
>       
>
>       On Thursday, March 12, 2015 9:06 PM, Leroy Clark <1oldengin at gmail.com> wrote:
>     
>
>   I am looking for a Maytag washer. I would hope it to be the aluminum style
> and does not need a motor. Thanks Leroy
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>
>
>     
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel


---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com



From rd.frost at yahoo.com  Fri Mar 13 07:19:04 2015
From: rd.frost at yahoo.com (Ron Frost)
Date: Fri, 13 Mar 2015 14:19:04 +0000 (UTC)
Subject: [SEL] Maytag washer
In-Reply-To: <5502E6F2.7070504@verizon.net>
References: <5502E6F2.7070504@verizon.net>
Message-ID: <948821916.452894.1426256344201.JavaMail.yahoo@mail.yahoo.com>

I'm going to have to call it a medium gray with a touch of brown or yellow in it. I'm sure it's original?as a big share of the paint is gone and it's bare metal underneath. ?My Mom had one just like it back in the 30's and 40's and it was the off gray color.?Ron Perma Frost ?

 ? ? 

     On Friday, March 13, 2015 9:32 AM, Richard Fink Sr <rfinksr at verizon.net> wrote:
   

 Ron what color is the tub on your washer, i ask because i had one i sold 
in my auction last fall that was green. Auctioneer said re never saw one 
that color. IT was not repainted that we could find.
R Fink
PA

On 3/13/2015 7:05 AM, Ron Frost wrote:
> I got one and it's a square tub aluminum.I think just what your looking for. It's in Kersey, PA. How about $50.00 . Will take pictures of you are interested. It's complete even with electric motor.
>? ? Ron Perma Frost
>
>? ? ? 
>
>? ? ? On Thursday, March 12, 2015 9:06 PM, Leroy Clark <1oldengin at gmail.com> wrote:
>? ? 
>
>? I am looking for a Maytag washer. I would hope it to be the aluminum style
> and does not need a motor. Thanks Leroy
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>
>
>? ? 
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel


---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com

_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel


   

From kkinney at herculesengines.com  Fri Mar 13 09:01:08 2015
From: kkinney at herculesengines.com (kkinney at herculesengines.com)
Date: Fri, 13 Mar 2015 11:01:08 -0500
Subject: [SEL] Maytag washer
In-Reply-To: <948821916.452894.1426256344201.JavaMail.yahoo@mail.yahoo.com>
References: <5502E6F2.7070504@verizon.net>
	<948821916.452894.1426256344201.JavaMail.yahoo@mail.yahoo.com>
Message-ID: <4BB7A7E8-E225-4319-A5E4-C2E87FC2F383@herculesengines.com>

Once we find a washer for Leroy I?d like to find one too.  We have one that we liked to take to shows but it had an unfortunate fall from a shelf and is in pieces now.  Same as Leroy, no engine needed just a good old square tub washer.
Thanks.
Keith


On Mar 13, 2015, at 9:19 AM, Ron Frost <rd.frost at yahoo.com> wrote:

> I'm going to have to call it a medium gray with a touch of brown or yellow in it. I'm sure it's original as a big share of the paint is gone and it's bare metal underneath.  My Mom had one just like it back in the 30's and 40's and it was the off gray color. Ron Perma Frost  
> 
>     
> 
>     On Friday, March 13, 2015 9:32 AM, Richard Fink Sr <rfinksr at verizon.net> wrote:
> 
> 
> Ron what color is the tub on your washer, i ask because i had one i sold 
> in my auction last fall that was green. Auctioneer said re never saw one 
> that color. IT was not repainted that we could find.
> R Fink
> PA
> 
> On 3/13/2015 7:05 AM, Ron Frost wrote:
>> I got one and it's a square tub aluminum.I think just what your looking for. It's in Kersey, PA. How about $50.00 . Will take pictures of you are interested. It's complete even with electric motor.
>>     Ron Perma Frost
>> 
>>       
>> 
>>       On Thursday, March 12, 2015 9:06 PM, Leroy Clark <1oldengin at gmail.com> wrote:
>>     
>> 
>>   I am looking for a Maytag washer. I would hope it to be the aluminum style
>> and does not need a motor. Thanks Leroy
>> _______________________________________________
>> SEL mailing list
>> SEL at lists.stationary-engine.com
>> http://www.stationary-engine.com/mailman/listinfo/sel
>> 
>> 
>>     
>> _______________________________________________
>> SEL mailing list
>> SEL at lists.stationary-engine.com
>> http://www.stationary-engine.com/mailman/listinfo/sel
> 
> 
> ---
> This email has been checked for viruses by Avast antivirus software.
> http://www.avast.com
> 
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
> 
> 
> 
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel




From bigtime64 at hotmail.com  Fri Mar 13 10:05:15 2015
From: bigtime64 at hotmail.com (Ed Herreid)
Date: Fri, 13 Mar 2015 17:05:15 +0000
Subject: [SEL] Maytag washer
In-Reply-To: <CA+B8urQ6RBV4b9WeSYr1b-DXLrfmDeMbmMAOto0k1BTv2Td_eA@mail.gmail.com>
References: <CA+B8urQ82iGaiMPEB8MAQMxfMH0pnO+U0_T9X+QVS1e26prsEQ@mail.gmail.com>,
	<CA+B8urQ6RBV4b9WeSYr1b-DXLrfmDeMbmMAOto0k1BTv2Td_eA@mail.gmail.com>
Message-ID: <SNT152-W46321503A2918E6E713EFAB4070@phx.gbl>

Leroy,
 
I might have what you need.  
Contact me off list.  
 
bigtime64 at hotmail.com
 
Ed Herreid
 

 
> Date: Thu, 12 Mar 2015 20:56:05 -0400
> From: 1oldengin at gmail.com
> To: sel at lists.stationary-engine.com
> Subject: [SEL] Maytag washer
> 
> I am looking for a Maytag washer. I would hope it to be the aluminum style
> and does not need a motor. Thanks Leroy
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
 		 	   		  

From frappi at wcoil.com  Fri Mar 13 10:55:53 2015
From: frappi at wcoil.com (Mark Shulaw)
Date: Fri, 13 Mar 2015 13:55:53 -0400
Subject: [SEL] Maytag washer
In-Reply-To: <948821916.452894.1426256344201.JavaMail.yahoo@mail.yahoo.c
 om>
References: <5502E6F2.7070504@verizon.net>
	<948821916.452894.1426256344201.JavaMail.yahoo@mail.yahoo.com>
Message-ID: <20150313175635.80E6980F0@smtp.wcoil.com>

Richard,
I think it was the model 60 that came with an Apple Green Finish.
A grey washer that gives off a brown or greenish 
cast is displaying the contamination of the paint 
surface with oils and dirts. Maytags washer paint 
was just a plain old enamel and was highly 
susceptible to dirt and oil penetrating the 
paint. Some times you can bring out the original 
shade by finding a spot with decent paint and polishing on it. Mark

At 10:19 AM 3/13/2015, you wrote:
>I'm going to have to call it a medium gray with 
>a touch of brown or yellow in it. I'm sure it's 
>original? as a big share of the paint is gone 
>and it's bare metal underneath. ? My Mom had one 
>just like it back in the 30's and 40's and it 
>was the off gray color.? Ron Perma Frost 
>?  ?  ?       On Friday, March 13, 2015 9:32 AM, 
>Richard Fink Sr <rfinksr at verizon.net> 
>wrote:    Ron what color is the tub on your 
>washer, i ask because i had one i sold in my 
>auction last fall that was green. Auctioneer 
>said re never saw one that color. IT was not 
>repainted that we could find. R Fink PA On 
>3/13/2015 7:05 AM, Ron Frost wrote: > I got one 
>and it's a square tub aluminum.I think just what 
>your looking for. It's in Kersey, PA. How about 
>$50.00 . Will take pictures of you are 
>interested. It's complete even with electric 
>motor. >?  ?  Ron Perma 
>Frost > >?  ?  ?  > >?  ?  ?  On Thursday, March 
>12, 2015 9:06 PM, Leroy Clark 
><1oldengin at gmail.com> wrote: >?  ?  > >?  I am 
>looking for a Maytag washer. I would hope it to 
>be the aluminum style > and does not need a 
>motor. Thanks Leroy > 
>_______________________________________________ > 
>  SEL mailing list > 
>SEL at lists.stationary-engine.com > 
>http://www.stationary-engine.com/mailman/listinfo/sel  
> > > >?  ?  > 
>_______________________________________________ > 
>  SEL mailing list > 
>SEL at lists.stationary-engine.com > 
>http://www.stationary-engine.com/mailman/listinfo/sel 
>--- This email has been checked for viruses by 
>Avast antivirus software. http://www.avast.com 
>_______________________________________________ 
>SEL mailing list SEL at lists.stationary-engine.com 
>http://www.stationary-engine.com/mailman/listinfo/sel 
>_______________________________________________ 
>SEL mailing list SEL at lists.stationary-engine.com 
>http://www.stationary-engine.com/mailman/listinfo/sel


Mark Shulaw
454 County Road 33
Bluffton, OH. 45817
USA

Frappi at wcoil.com / 419.358.5206  Home
Hobby Collector and Dealer in John Deere
and Hercules Engines.
Maytag Multi-Motor Engine parts.
VISIT the Maytag Collectors Club at  www.Maytagclub.com
Where Is John Galt  


---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com




From rfinksr at verizon.net  Fri Mar 13 12:00:59 2015
From: rfinksr at verizon.net (Richard Fink Sr)
Date: Fri, 13 Mar 2015 15:00:59 -0400
Subject: [SEL] Maytag washer
In-Reply-To: <20150313175635.80E6980F0@smtp.wcoil.com>
References: <5502E6F2.7070504@verizon.net>
	<948821916.452894.1426256344201.JavaMail.yahoo@mail.yahoo.com>
	<20150313175635.80E6980F0@smtp.wcoil.com>
Message-ID: <550333EB.3080609@verizon.net>

Thank you all we had this one about 30 years give or take
R Fink
PA

On 3/13/2015 1:55 PM, Mark Shulaw wrote:
> Richard,
> I think it was the model 60 that came with an Apple Green Finish.
> A grey washer that gives off a brown or greenish
> cast is displaying the contamination of the paint
> surface with oils and dirts. Maytags washer paint
> was just a plain old enamel and was highly
> susceptible to dirt and oil penetrating the
> paint. Some times you can bring out the original
> shade by finding a spot with decent paint and polishing on it. Mark
>
> At 10:19 AM 3/13/2015, you wrote:
>> I'm going to have to call it a medium gray with
>> a touch of brown or yellow in it. I'm sure it's
>> original? as a big share of the paint is gone
>> and it's bare metal underneath. ? My Mom had one
>> just like it back in the 30's and 40's and it
>> was the off gray color.? Ron Perma Frost
>> ?  ?  ?       On Friday, March 13, 2015 9:32 AM,
>> Richard Fink Sr <rfinksr at verizon.net>
>> wrote:    Ron what color is the tub on your
>> washer, i ask because i had one i sold in my
>> auction last fall that was green. Auctioneer
>> said re never saw one that color. IT was not
>> repainted that we could find. R Fink PA On
>> 3/13/2015 7:05 AM, Ron Frost wrote: > I got one
>> and it's a square tub aluminum.I think just what
>> your looking for. It's in Kersey, PA. How about
>> $50.00 . Will take pictures of you are
>> interested. It's complete even with electric
>> motor. >?  ?  Ron Perma
>> Frost > >?  ?  ?  > >?  ?  ?  On Thursday, March
>> 12, 2015 9:06 PM, Leroy Clark
>> <1oldengin at gmail.com> wrote: >?  ?  > >?  I am
>> looking for a Maytag washer. I would hope it to
>> be the aluminum style > and does not need a
>> motor. Thanks Leroy >
>> _______________________________________________ >
>>   SEL mailing list >
>> SEL at lists.stationary-engine.com >
>> http://www.stationary-engine.com/mailman/listinfo/sel
>>>>> ?  ?  >
>> _______________________________________________ >
>>   SEL mailing list >
>> SEL at lists.stationary-engine.com >
>> http://www.stationary-engine.com/mailman/listinfo/sel
>> --- This email has been checked for viruses by
>> Avast antivirus software. http://www.avast.com
>> _______________________________________________
>> SEL mailing list SEL at lists.stationary-engine.com
>> http://www.stationary-engine.com/mailman/listinfo/sel
>> _______________________________________________
>> SEL mailing list SEL at lists.stationary-engine.com
>> http://www.stationary-engine.com/mailman/listinfo/sel
>
> Mark Shulaw
> 454 County Road 33
> Bluffton, OH. 45817
> USA
>
> Frappi at wcoil.com / 419.358.5206  Home
> Hobby Collector and Dealer in John Deere
> and Hercules Engines.
> Maytag Multi-Motor Engine parts.
> VISIT the Maytag Collectors Club at  www.Maytagclub.com
> Where Is John Galt
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> http://www.avast.com
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>


---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com



From rd.frost at yahoo.com  Fri Mar 13 13:10:55 2015
From: rd.frost at yahoo.com (Ron Frost)
Date: Fri, 13 Mar 2015 20:10:55 +0000 (UTC)
Subject: [SEL] Maytag washer
In-Reply-To: <550333EB.3080609@verizon.net>
References: <550333EB.3080609@verizon.net>
Message-ID: <1750207451.6175841.1426277455617.JavaMail.yahoo@mail.yahoo.com>

Well if Leroy doesn't take it your next in line for it. ??Ron Perma Frost ?

 ? ? 

     On Friday, March 13, 2015 3:06 PM, Richard Fink Sr <rfinksr at verizon.net> wrote:
   

 Thank you all we had this one about 30 years give or take
R Fink
PA

On 3/13/2015 1:55 PM, Mark Shulaw wrote:
> Richard,
> I think it was the model 60 that came with an Apple Green Finish.
> A grey washer that gives off a brown or greenish
> cast is displaying the contamination of the paint
> surface with oils and dirts. Maytags washer paint
> was just a plain old enamel and was highly
> susceptible to dirt and oil penetrating the
> paint. Some times you can bring out the original
> shade by finding a spot with decent paint and polishing on it. Mark
>
> At 10:19 AM 3/13/2015, you wrote:
>> I'm going to have to call it a medium gray with
>> a touch of brown or yellow in it. I'm sure it's
>> original? as a big share of the paint is gone
>> and it's bare metal underneath. ? My Mom had one
>> just like it back in the 30's and 40's and it
>> was the off gray color.? Ron Perma Frost
>> ?? ?? ?? ? ? On Friday, March 13, 2015 9:32 AM,
>> Richard Fink Sr <rfinksr at verizon.net>
>> wrote:? ? Ron what color is the tub on your
>> washer, i ask because i had one i sold in my
>> auction last fall that was green. Auctioneer
>> said re never saw one that color. IT was not
>> repainted that we could find. R Fink PA On
>> 3/13/2015 7:05 AM, Ron Frost wrote: > I got one
>> and it's a square tub aluminum.I think just what
>> your looking for. It's in Kersey, PA. How about
>> $50.00 . Will take pictures of you are
>> interested. It's complete even with electric
>> motor. >?? ?? Ron Perma
>> Frost > >?? ?? ?? > >?? ?? ?? On Thursday, March
>> 12, 2015 9:06 PM, Leroy Clark
>> <1oldengin at gmail.com> wrote: >?? ?? > >?? I am
>> looking for a Maytag washer. I would hope it to
>> be the aluminum style > and does not need a
>> motor. Thanks Leroy >
>> _______________________________________________ >
>>? SEL mailing list >
>> SEL at lists.stationary-engine.com >
>> http://www.stationary-engine.com/mailman/listinfo/sel
>>>>> ?? ?? >
>> _______________________________________________ >
>>? SEL mailing list >
>> SEL at lists.stationary-engine.com >
>> http://www.stationary-engine.com/mailman/listinfo/sel
>> --- This email has been checked for viruses by
>> Avast antivirus software. http://www.avast.com
>> _______________________________________________
>> SEL mailing list SEL at lists.stationary-engine.com
>> http://www.stationary-engine.com/mailman/listinfo/sel
>> _______________________________________________
>> SEL mailing list SEL at lists.stationary-engine.com
>> http://www.stationary-engine.com/mailman/listinfo/sel
>
> Mark Shulaw
> 454 County Road 33
> Bluffton, OH. 45817
> USA
>
> Frappi at wcoil.com / 419.358.5206? Home
> Hobby Collector and Dealer in John Deere
> and Hercules Engines.
> Maytag Multi-Motor Engine parts.
> VISIT the Maytag Collectors Club at? www.Maytagclub.com
> Where Is John Galt
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> http://www.avast.com
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>


---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com

_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel

   

From rdhaskell at juno.com  Fri Mar 13 14:26:09 2015
From: rdhaskell at juno.com (rdhaskell at juno.com)
Date: Fri, 13 Mar 2015 14:26:09 -0700
Subject: [SEL] 8 cycle Aermotor
Message-ID: <AABLSGXUTA7LRR4A@smtpout02.vgs.untd.com>

Hi all.
Could someone please measure the spring on the governor in the flywheel
for an 8 cycle Aermotor?  I suspect mine is wrong, the wire size is .108"
with 4 coils, and a free length of .770"
Thanks.

Ron Haskell
rdhaskell at juno.com
Riverside, California USA
http://picasaweb.google.com/RonHaskell



From rotigel at me.com  Sat Mar 14 13:53:55 2015
From: rotigel at me.com (Dave Rotigel)
Date: Sat, 14 Mar 2015 16:53:55 -0400
Subject: [SEL] Glenn Wilson???????
Message-ID: <3E19DB39-C85C-464E-9C86-9AFD28082CEF@me.com>

Does anyone have contact with Glenn Wilson? I got a phone call today asking me for his contact info. from someone (in PA) who wants information on an engine Glenn either does, or did, own.
	Thanks for any help, Dave




From wilson at stny.rr.com  Sat Mar 14 14:40:27 2015
From: wilson at stny.rr.com (Glenn Wilson)
Date: Sat, 14 Mar 2015 17:40:27 -0400
Subject: [SEL] Glenn Wilson???????
In-Reply-To: <3E19DB39-C85C-464E-9C86-9AFD28082CEF@me.com>
References: <3E19DB39-C85C-464E-9C86-9AFD28082CEF@me.com>
Message-ID: <C50484E6-0EAA-4570-B853-9C2A2AE7A9F5@stny.rr.com>

I'm here Dave! I've been lurking in the background.   

Glenn Wilson
Endicott, NY
www.WilsonsWarbler.com

On Mar 14, 2015, at 4:53 PM, Dave Rotigel <rotigel at me.com> wrote:

Does anyone have contact with Glenn Wilson? I got a phone call today asking me for his contact info. from someone (in PA) who wants information on an engine Glenn either does, or did, own.
   Thanks for any help, Dave


_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel



From ozengine at yahoo.com.au  Sun Mar 15 16:53:52 2015
From: ozengine at yahoo.com.au (ozengine at yahoo.com.au)
Date: Sun, 15 Mar 2015 16:53:52 -0700
Subject: [SEL] Reggie everywhere
Message-ID: <1426463632.89525.YahooMailAndroidMobile@web121203.mail.ne1.yahoo.com>

Got back last week from 2 weeks in Tasmania. This was to take in the National and Sheffield Steamfest rallies and a round-Tas holiday with the gang. To see the rollers and locos drive up and park outside the pub for the dinner was spectacular, unique in Oz I would think. We had a great time there, it's really beautiful. Amongst the many things we saw, was the Zeehan museum (in Zeehan, of course). This was good, real good, but the highlight of that visit was meeting Reggie's daughter (Carol?) Who works there, part time!

Things about Reg always turn up unexpectedly!? She was very nice, and helpful answering historical questions, said he was 80 this year, still going strong, Marg as well. When I said we was here for the Rally, she added that her Dad builds model engines, that was notable, but when she said he lives in Newc, well that gave it away! I remember when Reg first joined the list, he was the age that I am now...

Graham in Oz



From rotigel at me.com  Sun Mar 15 17:38:34 2015
From: rotigel at me.com (Dave Rotigel)
Date: Sun, 15 Mar 2015 20:38:34 -0400
Subject: [SEL] Reggie everywhere
In-Reply-To: <1426463632.89525.YahooMailAndroidMobile@web121203.mail.ne1.yahoo.com>
References: <1426463632.89525.YahooMailAndroidMobile@web121203.mail.ne1.yahoo.com>
Message-ID: <3285EAE9-2085-4F82-ABC4-706BC18CC289@me.com>

Hi Grahn, 
	I was under the impression that Reg was a bit younger than that and that Marg was LOTS younger than that. At least she looks that way in the pictures I've seen. I've always been under the impression that Marg just kinda liked OLDER bike riders and that's why she "fell" for Reg.
	Dave
PS, In any event, Reg is ONE LUCKY SOB!

On Mar 15, 2015, at 7:53 PM, ozengine at yahoo.com.au wrote:

> Got back last week from 2 weeks in Tasmania. This was to take in the National and Sheffield Steamfest rallies and a round-Tas holiday with the gang. To see the rollers and locos drive up and park outside the pub for the dinner was spectacular, unique in Oz I would think. We had a great time there, it's really beautiful. Amongst the many things we saw, was the Zeehan museum (in Zeehan, of course). This was good, real good, but the highlight of that visit was meeting Reggie's daughter (Carol?) Who works there, part time!
> 
> Things about Reg always turn up unexpectedly!  She was very nice, and helpful answering historical questions, said he was 80 this year, still going strong, Marg as well. When I said we was here for the Rally, she added that her Dad builds model engines, that was notable, but when she said he lives in Newc, well that gave it away! I remember when Reg first joined the list, he was the age that I am now...
> 
> Graham in Oz
> 
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel




From plowe at exemail.com.au  Wed Mar 18 03:40:39 2015
From: plowe at exemail.com.au (Peter Lowe)
Date: Wed, 18 Mar 2015 21:40:39 +1100
Subject: [SEL] Cezeta motorcycle info wanted
Message-ID: <2D4AA2B21E6545B9B96DADBFEBA03172@PeterPC>

Hi world wide group,
Does anyone know where I can source a starter / generator unit for a Cezeta 501 61 100 motor scooter and pictures of same. The one unit starts the bike and then charges. This is probably more aimed at UK members.

Regards
Peter Lowe
R&V Engine Registrar
http://www.oldengine.org/members/plowe/rv-engines/rvpage.htm

From wilson at stny.rr.com  Wed Mar 18 11:50:04 2015
From: wilson at stny.rr.com (Glenn Wilson)
Date: Wed, 18 Mar 2015 14:50:04 -0400
Subject: [SEL] Ramp Atifreeze
Message-ID: <C4236B6D-BA1D-4221-8914-69EF034DDB9C@stny.rr.com>

I still have the case of Ramp Atufreeze. I meant to have it shipped to Michigan but my friend took off without it. 
I still have it. I still want to get rid of it. If you'd like a quart email me your name and shipping address. I'll send one out free. If, after receiving it, you feel like paying me back shipping, I'll accept it. 

At the risk of being scolded (like I was one day for "walking all over" someone's engine) I will add a small picture here. 
-------------- next part --------------

Thank you
 
-------------- next part --------------

Glenn Wilson
Endicott, NY
www.WilsonsWarbler.com

From wilson at stny.rr.com  Wed Mar 18 12:16:21 2015
From: wilson at stny.rr.com (Glenn Wilson)
Date: Wed, 18 Mar 2015 15:16:21 -0400
Subject: [SEL] Ramp Atifreeze
In-Reply-To: <C4236B6D-BA1D-4221-8914-69EF034DDB9C@stny.rr.com>
References: <C4236B6D-BA1D-4221-8914-69EF034DDB9C@stny.rr.com>
Message-ID: <C048F8C0-9A1D-47A9-AAFD-4FA1DD3C8C66@stny.rr.com>

Ok. It's obvious the picture didn't make it through. I'll gladly send anyone interested a picture. 

Glenn Wilson
Endicott, NY
www.WilsonsWarbler.com

On Mar 18, 2015, at 2:50 PM, Glenn Wilson <wilson at stny.rr.com> wrote:

I still have the case of Ramp Atufreeze. I meant to have it shipped to Michigan but my friend took off without it. 
I still have it. I still want to get rid of it. If you'd like a quart email me your name and shipping address. I'll send one out free. If, after receiving it, you feel like paying me back shipping, I'll accept it. 

At the risk of being scolded (like I was one day for "walking all over" someone's engine) I will add a small picture here. 

Thank you


Glenn Wilson
Endicott, NY
www.WilsonsWarbler.com
_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel



From fero_ah at city-net.com  Thu Mar 19 15:11:29 2015
From: fero_ah at city-net.com (Arnie Fero)
Date: Thu, 19 Mar 2015 18:11:29 -0400 (EDT)
Subject: [SEL] Coolspring Power Museum 2015 Flame Ignition Expo
Message-ID: <c2e0c1115e9d664ae7b441d8752e1d47.squirrel@mail.realprodata.com>

>From Wayne Grenning on Smokstak...

This will be a very significant event. I just totaled the engines on my
list that I am aware of that are "likely to attend". Including the ones
already at the museum, there will be 36 flame ignition engines on display.
This years event will have 3 times more flame ignition engines than were
present at the infamous 1995 Flame Ignition Expo! I would expect another
30 or so flame ignition models to be on display as well. If anyone ever
needed an excuse to visit the Coolspring Museum, this would be it!